|
| ■Product Name |
【Only 1 Unit Available】
SUMITOMO/Sumitomo Electric
Fiber Fusion Splicer TYPE-45M
Older model of TYPE-25M, TYPE-25eM, and TYPE-201M4
Performance is almost the same◆ TYPE-25e Series = TYPE-25eM ※It is a series product equivalent to TYPE-25M, etc. (Older model of TYPE-201M4, TYPE-201eM4, TYPE-201+, and TYPE-201+)
■Up to 4 cores |
| ■Accessories |
|
・Instruction Manual
・Battery (BU-65) × 1 unit ※Only 1 unit is included
・Power Cord
・Power Supply Unit (PS-65)
・Reinforcement Part Tray
・Hard Case
・Key
・Strap
※All accessories are shown in the photos.
Items not shown in the photos are not included, so please note this in advance.
●Regarding batteries, rechargeable batteries, parts, and consumables that need replacement
They are not covered by the initial product defect or operation warranty. Please arrange them yourself if necessary. Please note this in advance. |
|
It is possible to perform high-speed batch fusion splicing of up to 4 single-mode silica fiber cores.
Furthermore, by using the heating reinforcement device installed in the fusion splicer, it is possible to shrink the fiber protection sleeve at high speed.
Since the state of the optical fiber is automatically inspected during fusion splicing, no difficult techniques are required.
Also, since the device operation method is always displayed as a message on the monitor, it can be used immediately if you understand the basic operations. |
| ■Condition |
※Operation is not covered by the warranty. No claims, no returns, no support.
Please understand that we cannot accept inquiries or explanations after purchase.
※Maintenance and repair costs are borne by the customer.
※The product condition is exactly as shown in the photos. We look forward to orders from those who understand this.
※Please refrain from purchasing if you are strict about the condition.
※We do not guarantee the remaining battery capacity.
Even if the remaining capacity is low, consumables are not covered by the warranty.
|
|
【Applicable Fiber】
◆Material: Silica glass
◆Type: Single-mode fiber (SM) 1, 2, 4 cores
Multi-mode fiber (GI) 1, 2, 4 cores
Dispersion-shifted fiber (NZ-DSM) 1, 2, 4 cores
Non-zero dispersion-shifted fiber (NZ-DSM) 4 cores
◆Fiber outer diameter: 125μm standard
◆Fiber coating outer diameter: 250μm, 900μm (single-mode only)
◆Fiber pitch: 250μm
◆Cut length: 10mm
【Dimensions and Weight】
◆Dimensions: 150W×150D×150H mm (excluding protrusions)
◆Weight: Approx. 3kg
◆Monitor: 5.6 inches
【Fusion Splicing】
◆Average connection loss: SM 0.05dB
GI 0.03dB
DSM 0.07dB
NZ-DSM 0.05dB
◆Standard connection time: 4 cores Approx. 19 seconds
◆Data memory: 450 connections
◆Estimated loss function: SM, DSM, NZ-DSM
◆Connection condition count: 12 types (Fider3×4 cores) Max. 48 types
◆Connection condition parameters: 5 types
◆Screening function: Fixed design value 1.9N (200gf)
【Heating Reinforcement】
◆Reinforcement time: 4 cores Approx. 100 seconds (High-speed mode Approx. 75 seconds)
◆Reinforcement material: FPS-1, FPS-5
◆Pre-tension function: Fixed 0.49N (50gf)
※Specifications are for reference only. Listed based on the manufacturer's website.
There may be incorrect descriptions. Please contact us if you find any, and we will correct them. Please consider them as reference only.
For details, please contact the manufacturer.
|
The shipping area is Kyoto.
■Shipping Fee (Prepaid only)
Flat rate nationwide: 3,200 yen
Shipping to Hokkaido, Okinawa, and remote islands is also the same shipping fee.
※We insure all shipped products with cargo insurance.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will provide repair service.
Returns are not accepted. Please note this in advance.
|
●Except for some products, all products handled by our company are resale products.
Depending on the product, there may be scratches, stains, and other changes due to aging. Please judge by the photos.
There may be scratches and stains that cannot be fully captured in the photos. Also, judgment criteria for the condition of the product vary from person to person. Please note this in advance.
Furthermore, since images and descriptions alone cannot fully convey the detailed condition, please do not purchase if you are overly concerned about the condition, hope for a perfect product with no scratches, stains, or fingerprints, or are overly sensitive.
Due to the nature of used products, they have already been used, and various internal parts are worn out. Which part needs replacement when? When will it break and need to be replaced? It is completely unpredictable. The condition may deteriorate due to various causes, such as changes during transportation or the customer's storage method.
Therefore, our company will only provide support within the warranty period for products stated on the product page as having an initial defect warranty. There is no warranty for products not listed on the product page.
In the sale of used products, our service is limited to the provision of the item itself. Since we sell it as-is, in principle, there is no product description or after-sales service. Please research the usage method, maintenance method, and other necessary knowledge and information yourself. Please consider purchasing used products with this understanding.
|
