| ■Product Name |
|
Compatible with small-diameter manholes!! ■Separate control and laser units
TOPCON
Top-of-the-line pipe laser
TP-L3S
[Includes battery, charger, and air pump]
Equipped with auto-alignment function
Fully automatic self-leveling function automatically aligns the laser with the target
Three-direction laser beam projection: horizontal and vertical
|
| ■Included Accessories |
・Instruction manual
・Case
・Air bag
・Rubber hose
・Connecting hose
・Air pump
・Targets (1 large and 1 small)
・Target holder
・Remote control (RC-200)
・4 AAA batteries
・Self-sensor ring legs
・Battery adapter
・Chain
・Rod
・Batteries (2)
・Laser unit
・Converter
・Three-point support legs
※All included accessories are shown in the photos.
Please note that anything not shown in the photos is not included.
●Batteries and battery packs requiring replacement, as well as parts and consumables requiring replacement, are not covered by the product's initial defect or operating warranty. Please arrange for replacements yourself if needed. Thank you for your understanding.
|
|
By separating the control unit from the laser unit, the TP-L3S can be used in small-diameter manholes with a 300 × 150 mm opening, such as those used in recent agricultural community wastewater projects.
Since the control unit and laser unit are separate, there is no risk of the laser alignment shifting during operation or when replacing the battery.
The space above conventional pipe lasers is completely secured with an air bag.
This prevents vibration from shifting the laser alignment.
The laser unit installed inside the pipe is raised using the 6 m retrieval chain.
Three-direction laser beam projection: horizontal and vertical
|
| ■Condition |
■Operation has been tested!!
To ensure that our customers receive a good product, we performed the following cleaning before sale.
Cleaning performed:
・Exterior cleaning
The previous owner took good care of it, so it is in very good condition.
However, this is a used item and has minor scratches from use.
※Accuracy is not guaranteed. The item is sold as-is. Any necessary adjustments or setup must be carried out at the buyer's expense.
※The item will be handed over in the condition shown in the photos. Please purchase only if you are satisfied with this. |
|
Laser emission
Laser source: LD (laser diode)
Laser wavelength: 633 nm (red)
Output at aperture: 2 mW (max.)
Laser class: Class 3R
Beam diameter: φ12 mm
Power supply / battery life
(4 × D-cell alkaline batteries): approx. 40 hours
Temperature range: Operating temperature -20°C to +50°C
Water resistance: Fully waterproof
(JIS protection rating 7 or higher; immersion-proof)
Dimensions (mm): φ122 mm × 252 mm
(laser unit)
φ125 mm × 279 mm
(control unit)
Weight: approx. 2.8 kg (laser unit)
※Specifications are provided for reference only and are based on information from the manufacturer's website.
Some information may be incorrect. Please contact us if you notice an error, and we will correct it. Please use this information as a general reference only.
For details, please contact the manufacturer.
|
Ships from Kyoto
■Shipping fee (prepaid shipping only)
¥3,200 nationwide
The shipping fee is the same for Hokkaido, Okinawa, and remote islands.
※All items we ship are covered by shipping insurance.
Please contact us if the item is damaged in transit.
If the damage can be repaired, we will arrange a repair.
Returns are not accepted. Thank you for your understanding.
|
●Except for some items, the products we sell are pre-owned.
Depending on the item, there may be signs of age such as scratches or dirt. Please judge the condition from the photos.
There may also be scratches or dirt that are not fully captured in the photos. In addition, assessments of an item's condition vary from person to person. Please understand this in advance.
Since photos and descriptions cannot fully convey the item's condition, please do not purchase if you are highly particular about condition, require a flawless item with absolutely no scratches, dirt, or fingerprints, or are otherwise especially sensitive to such details.
As used items have already been in use, various internal components may be worn. It is impossible to predict which parts will need replacing or when, or when the item may break and require repair. The condition may deteriorate for various reasons, including changes during shipping or how the item is stored by the buyer.
Accordingly, we provide support only during the warranty period and only for items whose product page states that they include an initial defect warranty. Items for which no warranty is stated on the product page are not covered by a warranty.
For sales of used goods, our service is limited to providing the item. Items are sold as-is, and as a rule, no further product support or after-sales service is provided. Please research the operating and maintenance procedures, as well as any other information you need, yourself. Please consider purchasing used items with this understanding.
|
