Please let us know if you would like a quotation or receipt.
We will do our best to accommodate your circumstances.
■Product Name
TOPCON
Pipe Laser TP-L3A
With battery holder
■Included Accessories
・Instruction manual
・Complete target set (1 large and 1 small, with holder)
・Remote controller
・Battery box
・Pipe-diameter-specific legs
(φ50mm, φ200, φ250mm, φ300mm)
・Three-point support points
・Hard carrying case
※Everything shown in the photos is included.
Please note that items not shown in the photos are not included.
●Batteries and parts or consumables that need replacement
Are not covered by the product's initial defect or operation warranty. Please arrange replacements yourself if needed. Thank you for your understanding.
▼Higher-end model
Equipped with an auto-alignment function!
Automatically levels to the target. Its waterproof construction can withstand being submerged at a depth of 25 m for 24 hours, so it can be used with confidence even in areas at risk of flooding.
The automatic function aligns the laser with the center of the target when positioning inside narrow pipes, improving work efficiency.
It uses a cordless internal power supply and is available with either rechargeable batteries or dry-cell batteries.
It can be used with pipes as small as φ150 mm, making it suitable for smaller-scale piping work.
The TP-L3A/L3G can project lasers horizontally as well as vertically (plumb function).
◆ Grade setting range: -15% to +40%
◆ Auto-alignment range: 5 m to 100 m
◆ Horizontal accuracy: ±10"
◆ Operating temperature range: -20°C to +50°C
◆ Laser source: LD
◆ Laser wavelength: 633 nm
Condition
Specifications
■Condition
■Operation has been tested!
To ensure we deliver a quality product, we performed the following cleaning before sale.
Areas cleaned
・Exterior
・Interior
Please note that the LCD backlight is very dim, and there are minor scratches from use.
Accuracy is not guaranteed.
Sold as-is.
Any adjustments or setup required will be at the customer's expense.
※The item will be handed over in the condition shown in the photos. Please purchase only if you accept this condition.
Laser source: LD
Laser wavelength: 633 nm
Output power: 1 mW max.
Beam diameter: φ14 mm
Line control range: ±15%
Grade setting range: -15% to +40% (-150‰ to -400‰)
Minimum grade increment: 0.001%
Grade setting angle detection: Encoder
Automatic leveling range: Within ±10% of the unit's tilt
Horizontal accuracy: ±10"
Auto-alignment range: 5 m to 100 m
Operating time: DB-38: Approx. 50 hours (alkaline batteries)
: Approx. 25 hours (manganese batteries)
Operating temperature range: -20°C to +50°C
Dimensions: φ122 mm × 374 mm (excluding handle)
Weight: 3.8 kg
Up/down laser
Laser source: LD
Laser wavelength: 633 nm
Output power: 0.5 mW max.
Compensation range: Grade direction ±4°
Rotation direction ±2°
Vertical accuracy: Upper laser: ±1′
Lower laser: ±3.5′
▼Remote control RC-200
Operating range: Approx. 200 m on laser emission side (inside pipe)
Remote control functions: Line control, laser ON/OFF,
Laser mode switching,
Auto-alignment, auto-centering
Power: Four AA batteries
Operating time: Approx. 8 months (alkaline batteries)
Approx. 4 months (manganese batteries)
※Specifications are provided for reference only and are based on the manufacturer's website.
Some information may be incorrect. Please contact us if you notice an error, and we will correct it. Please use this information as a guide only.
For details, please contact the manufacturer.
Shipping
Payment
Ships from Kyoto
■Shipping fee (prepaid only) ¥3,200 nationwide
The shipping fee is the same for Hokkaido, Okinawa, and remote islands.
※All items we ship are covered by transport insurance.
Please contact us if the item is damaged in transit.
If the damaged area can be repaired, we will arrange a repair.
Returns are not accepted. Thank you for your understanding.
Please let us know if you would like a quotation or receipt.
We will do our best to accommodate your circumstances.
●We can issue a set of three documents: quotation, invoice, and delivery note.
Please provide the necessary details for issuance (billing address, delivery address, date of stamp, etc.).
※If you need these documents, please contact us before purchasing.
Payment, returns & documents
Payment methods
Choose from the payment methods shown at checkout.
Returns & warranty
As these are used items, we cannot accept returns or exchanges for change of mind. Please test the item within 3 days of arrival and contact us if there is an initial defect. Batteries and consumables are not covered.
Quotes & receipts
We can issue quotes, invoices and receipts. Please send us the addressee details via the contact form.
