|
Dimensions: W508×D760×H1530 mm
Capacity: Cylinder 2.5L, Mix Tank 8.4L×2
Material: [Exterior] Stainless steel sheet
[Insulation] Rigid polyurethane foam
Production Capacity: [Soft Serve] 220 units/hr ×2 (100mL/unit)
[Shake] 280 cups/hr ×2 (100mL/cup)
Continuous Dispensing: [Soft Serve] approx. 13 units ×2 (100mL/unit)
[Shake] approx. 14 cups ×2 (100mL/cup)
Overrun: Approx. 40%
Water Consumption: 510/594L/day
Max Water Flow: 4.4/4.8L/min
▼Refrigeration Cycle
[Compressor] Fully hermetic, nominal output 750W×2
[Condenser] Water-cooled
[Evaporator] Stainless steel cylinder
[Refrigerant] R404A
[Temp Control] Microcomputer control
▼Electrical Ratings
[Power] Three-phase 200V 50/60Hz
[Power Consumption] 3.2/3.8kW
[Operating Current] 12.6/13.0A
[Starting Current] 74.4/67.8A (for simultaneous L/R start)
[Agitator Motor] Output 750W×2
▼Heat Sterilization
[Method] Simple hot gas method
[Temp × Time] 72℃ × 40 min
[Process Time] Within 4 hours
▼Power
[Power Cord] Length 4.5m, 4-core (2.0m), Earthed 3-pin plug
[Compatible Outlet] Earthed 3-pin, 20A 250V
▼Pipe Diameters
Water inlet: R1/2, Drain: φ34.5, Flexible hose
※We are not responsible for product damage caused by installation errors.
Please hire a qualified professional for installation. "Be very careful of installation errors by parties other than licensed water/electrical contractors."
※Water supply/drain hoses must be prepared by the installation contractor according to the environment. These are not included from the factory.
※Specifications are for reference only, sourced from the manufacturer's website.
Errors may occur. Please contact us for corrections. Use only as a guide.
For details, please inquire directly with the manufacturer.
|
|
Shipping origin is Kyoto
■Shipping Cost (Prepaid only)
Due to the large size, shipping costs vary by region.
[Hokkaido] 36,000 JPY
[Tohoku] 32,000 JPY [Aomori, Iwate, Akita, Miyagi, Yamagata, Fukushima]
[Kanto] 26,000 JPY [Ibaraki, Tochigi, Gunma, Saitama, Chiba, Tokyo, Kanagawa, Yamanashi]
[Shinetsu] 24,000 JPY [Niigata, Nagano]
[Hokuriku] 22,000 JPY [Toyama, Ishikawa, Fukui]
[Tokai] 22,000 JPY [Gifu, Shizuoka, Aichi, Mie]
[Kansai] 21,000 JPY [Shiga, Kyoto, Osaka, Hyogo, Nara, Wakayama]
[Chugoku] 22,000 JPY [Tottori, Shimane, Okayama, Hiroshima, Yamaguchi]
[Shikoku] 22,000 JPY [Tokushima, Kagawa, Ehime, Kochi]
[Kyushu] 28,000 JPY [Fukuoka, Saga, Nagasaki, Oita, Kumamoto, Miyazaki, Kagoshima]
[Okinawa] 38,000 JPY
※Additional shipping costs apply for remote islands. Please contact us before purchasing.
※Delivery is to the curbside only.
(Curbside delivery means outside the entrance for houses, or at the main entrance for buildings/apartments.)
Deliveries are usually handled by a single driver.
If the delivery location is on the second floor or higher, please make your own arrangements.
Even at the curbside, we may refuse delivery if access is deemed difficult.
Please inquire beforehand via the product page inquiry form.
※We insure all shipments. If any damage occurs, please contact us.
If damaged parts can be repaired, repair service will be provided.
Returns are not accepted. Thank you for your understanding.
|
●Except for certain items, our products are resale items.
Depending on the item, there may be aging such as scratches or dirt. Please judge by the photos.
There may be scratches or dirt that cannot be captured in photos. Judgment of the product's condition is subjective. Please understand this in advance.
Since images and descriptions cannot convey all details, please do not purchase if you are highly sensitive, or if you require a perfect product free of any scratches, dirt, or fingerprints.
As these are used items, they have been previously used and internal parts are worn. It is impossible to predict when parts will require replacement or fail. Condition may worsen due to transit or storage methods.
Therefore, our products are only covered by an initial defect warranty if explicitly stated on the product page. Products without such mention have no warranty.
In selling used items, our service is limited to providing the product. Items are sold "as is" and there is no accompanying explanation or after-sales support. Users are responsible for researching how to use and maintain the equipment. Please consider these points carefully before purchasing used goods.
|
