|
Please let us know if you would like an estimate or receipt.
We will accommodate your needs as flexibly as possible.
| ■Product Name |
|
[Calibrated]
SOKIA/Sokkia
Total Station
SET4110S
■Shift type
▼Programs: Stakeout Traverse calculation, resection, etc.
Numeric keypad built into unit
■Calibration date: 2020 / /
※The unit has not been used since calibration.
Calibration certificate is not included, but
one can be issued for ¥30,000 upon request.
|
| ■Included Accessories |
・Instruction manual
・Catalog
・Battery
・Charger
・Carrying case
※Everything shown in the photos is included.
Please note that items not shown in the photos are not included.
●Batteries requiring replacement, as well as parts and consumables requiring replacement
are not covered by the initial defect or operation warranty. Please arrange replacements yourself if needed. Thank you for your understanding.
|
|
●Register coordinate data indoors, call up point numbers on site, and perform applied surveying using coordinates right there.
●Easy-to-use control panel
The large display shows alphanumeric characters, kana, and graphics. You can view a wealth of information at once, including measurement values, point numbers/names, 3D current coordinates, and selected modes. The control keyboard consists of soft keys, editing keys, and alphanumeric keys. The interactive operation allows you to enter JOB names, point names (codes), and alphanumeric or kana notes.
●Versatile programs and coordinate memory (stores approx. 3,000 points); directly measure structures using reflective sheets
Resection (instrument setup)/automatic azimuth setting/stakeout/offset measurement/remote distance measurement/REM measurement + raw data (SHV); stores approx. 3,000 points total of coordinate and other data, with data management by JOB, and also allows free records.
|
| ■Condition |
■Tested and confirmed working!!
To ensure you receive a quality product, we performed the following cleaning before sale.
Areas cleaned:
・Exterior cleaning
・Interior cleaning
However, this is a used item and may have minor scratches from use.
※The item will be delivered in the condition shown in the photos. Please purchase only if you are satisfied with this.
|
|
[Telescope]
Overall length: 165 mm
Effective objective aperture: 45 mm (EDM: 50 mm)
Magnification: 30×
Image: Erect
Resolving power: 3″
Field of view: 1°30′
Minimum focusing distance: 1.0 m
Reticle illumination: Bright/dim selectable
Two-speed focusing knob: Yes
[Angle Measurement Unit]
Method: Photoelectric absolute rotary encoder
Accuracy: 5″
Minimum display: 10″/5″ selectable
Angle measurement time: Continuous measurement at intervals of 0.5 seconds or less
Automatic compensation: Selectable correction of horizontal and vertical angles, vertical angle only, or no correction; liquid-type dual-axis tilt sensor; compensation range: ±3′
[Distance Measurement Unit]
Measuring range (slope distance): Reflective target: 1–80 m (with RS90N)
Compact reflector prism: 1–600 m
Single-prism reflector: 1–1,600 m
Triple-prism reflector: 1–2,100 m
Nine-prism reflector: 1–2,500 m
Measurement modes: Fine continuous, fine average, fine single, fast continuous, fast single, tracking
Minimum display: Fine measurement: 1 mm
Fast measurement: 1 mm
Tracking measurement: 10 mm
Measurement time: Fine measurement: every 2.0 seconds (first measurement: 4.2 seconds)
Fast measurement: every 0.7 seconds (first measurement: 2.9 seconds)
Tracking measurement: every 0.5 seconds (first measurement: 2.9 seconds)
Accuracy: With reflective target: Fine measurement ±(4 + 3 ppm × D)
Fast measurement ±(5 + 5 ppm × D)
With reflector prism: Fine measurement ±(4 + 3 ppm × D)
Fast measurement ±(5 + 5 ppm × D)
※(D = measuring distance)
Atmospheric correction: Input by temperature and pressure or by ppm value, selectable
Reflector prism constant correction: +99 mm to −99 mm (1 mm increments)
Earth curvature and atmospheric refraction correction: On/off selectable
Automatic light intensity adjustment: Yes
[General]
Data storage: Stores up to 3,000 points
Calendar clock: Yes
Printer output: Can print directly to a Centronics-compatible printer using optional DOC46 printer cable
Keyboard: 28 conductive rubber keys (alphanumeric keys, editing keys, soft keys, illumination key, power key)
Display: Alphanumeric/kana LCD, graphic display, 120 × 64 dot matrix, 20 characters × 8 lines on both face 1 and face 2, with illumination
Level sensitivity: Plate level: 30″/2 mm; circular level: 10′/2 mm
Optical plummet: Erect image, 3× magnification, minimum focusing distance: 0.5 m (from base plate)
Operating temperature range: −20°C to +50°C
Horizontal axis height: 236 mm (193 mm from tribrach base)
Dimensions: 177 (W) × 165 (D) × 345 (H) mm
Weight: 5.6 kg
[Power]
Internal battery: Removable BDC35 battery
(NiMH rechargeable battery, DC 6 V)
Continuous operating time (25°C): Distance and angle measurement: approx. 5.5 hours (approx. 660 points)
(measurement every 30 seconds in fine single-measurement mode)
Angle measurement only: approx. 7 hours
※Specifications are provided for reference only and are based on the manufacturer's website.
Some information may be incorrect. Please contact us if you notice an error, and we will correct it. Please treat these specifications as a guide only.
For details, please contact the manufacturer.
|
|
Ships from Kyoto
■Shipping fee (prepaid only)
¥3,200 nationwide
The same shipping fee applies to Hokkaido, Okinawa, and remote islands.
※All items shipped by our company are insured in transit.
Please contact us if damage occurs.
If the damaged part can be repaired, we will arrange a repair.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like an estimate or receipt.
We will accommodate your needs as flexibly as possible.
●We can issue a three-part set of documents: estimate, invoice, and delivery note.
Please provide the details required for issuance, such as the billing address, delivery address, and date for the seal.
※If you need these documents, please contact us before making your purchase.
|
