|
Please let us know if you would like an estimate or receipt.
We will do our best to accommodate your needs.
| ■Product Name |
|
【With Calibration Certificate】
SOKIA
Non-Prism Total Station
SET4110R
■Calibration Date: Year Month Day
※Has not been used since calibration
|
| ■Included Accessories |
・Instruction manual
・Calibration certificate
・Internal battery
・Charger
・Silicone cloth
・Tool set (screwdriver, adjustment pin, lens brush)
・Plumb bob
・Lens hood
・Storage case
※Everything shown in the photos is included.
Please note that items not shown in the photos are not included.
●Batteries requiring replacement, and parts or consumables requiring replacement
are not covered by the initial defect or operational warranty. Please arrange replacements yourself if needed. Thank you for your understanding.
|
|
The SET4110R is an advanced model featuring a non-prism function in addition to the SET4110's capabilities!!
The functions and operation of the SET3110R/SET4110R are nearly the same as those of the SET2110/SET3110/SET4110. A high-performance model that holds its own against the SET3030.
Measurement range: 1.0–1,600 m (using a single-prism AP reflector); minimum angle display: 10″/5″; angle accuracy: 5″; weight: 5.5 kg (with battery)
Memory: approx. 3,000 points; maximum 24 jobs; built-in programs (remote elevation measurement, REM measurement, offset measurement, two-point target measurement, 3D coordinate measurement,
stakeout measurement, resection, automatic direction angle setting, angle repetition measurement)
Easy-to-use control panel (kana characters can also be entered for coordinates)
Large display shows alphanumeric characters, kana, and graphics.
A wealth of information, including measurement values, point numbers/names, 3D coordinates, and selected modes,
can be viewed at a glance.
● Tribrach type: detachable
● Certification: Japan Geospatial Information Authority Class 3
● Angle accuracy: 5"
● Angle measurement method: incremental angle measurement
● Distance accuracy: (2 mm + 2 ppm × D) m.s.e.
※SET4110RS is shift type
|
| ■Condition |
■Operation has been checked!!
To ensure we deliver a quality product, we performed the following cleaning before sale.
Areas cleaned:
・Exterior cleaning
・Interior cleaning
Please note that this is a used item and may have small scratches from use.
※The item will be delivered in the condition shown in the photos. Please purchase only if you are satisfied with its condition.
|
|
▼Telescope
Overall length: 165 mm
Clear aperture: 45 mm (EDM: 50 mm)
Magnification: 30×
Image: erect
Resolution: 3″
Field of view: 1°30′
Minimum focusing distance: 1.0 m
Focusing: two-stage fine/coarse adjustment
Reticle illumination: bright/dim (selectable)
▼Angle Measurement Unit
Measurement method: incremental type with 0 index (absolute origin)
Minimum display: 5″/10″
Accuracy: 5″
Angle measurement time: continuous measurement at intervals of 0.5 seconds or less
Automatic tilt compensation mechanism
Compensates for vertical and horizontal angles / vertical angle only / no compensation (selectable)
Type: liquid (2-axis)
Minimum display: follows the selected minimum angle display value
Range: ±3′
Angle measurement modes
Horizontal angle: clockwise/counterclockwise/hold/repetition (selectable)
Vertical angle: zenith 0°/horizontal 0°/horizontal 0° ±90° (selectable)
▼Distance Measurement Unit
Measurement method: coaxial near-infrared laser, modulated light phase-difference measurement
Measurement range
White paper: 2–85 m
Reflective sheet RS90N: 2–500 m
Minimum display
Fine measurement: 1 mm
Rapid measurement: 1 mm
Maximum slope distance display: 9999.999 m
Accuracy
Fine measurement: white paper ±(5 + 3 ppm × D) mm
Reflective sheet ±(3 + 3 ppm × D) mm
Prism ±(5 + 3 ppm × D) mm
Rapid measurement: white paper ±(7 + 5 ppm × D) mm
Reflective sheet ±(7 + 5 ppm × D) mm
Prism ±(7 + 5 ppm × D) mm
Measurement time: fine measurement: 3.7 seconds for the first measurement, then every 2.0 seconds (up to 10 times)
Rapid measurement: 3.1 seconds for the first measurement, then every 1.2 seconds (up to 20 times)
Light source: laser diode
Wavelength: 830 nm
Distance measurement signal strength check: display/audio, with or without (selectable)
Atmospheric correction, temperature input range: -30–60° (1°C increments)
Pressure input range: 500–1400 hPa (1 hPa increments)
Prism constant correction value: -99–99 mm
▼Power Supply Unit
Power supply: detachable BDC35 battery
▼Miscellaneous
Bubble sensitivity: tubular vial: 30″/2 mm
circular vial: 10′/2 mm
Plummet telescope image: erect
Magnification: 3×
Minimum focusing distance: 0.5 m
Horizontal/telescope fine motion: two-stage fine/coarse adjustment
Operating temperature range: -20–50°C
Instrument height: 236 mm
Dimensions: 177 (W) × 165 (D) × 345 (H) mm
Weight: main unit 5.7 kg
※Specifications are provided for reference only and are based on the manufacturer's website.
Some information may be incorrect. Please contact us if you find any errors, and we will correct them. Please treat these specifications as a general reference only.
For details, please contact the manufacturer.
|
|
Ships from Kyoto, Japan
■Shipping (prepaid shipping only)
¥3,200 nationwide
The same shipping fee applies to Hokkaido, Okinawa, and remote islands.
※All items shipped by our company are covered by shipping insurance.
Please contact us if the item is damaged during shipping.
If the damaged part can be repaired, we will arrange a repair.
Returns are not accepted. Thank you for your understanding.
|
Please let us know if you would like an estimate or receipt.
We will do our best to accommodate your needs.
●We can issue a set of three documents: estimate, invoice, and delivery note.
Please provide the necessary details for issuance (billing address, delivery address, date to be stamped, etc.).
※If you need these documents, please contact us before purchasing.
|
