|
Please let us know if you would like a quotation or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
|
[Calibrated]
SOKIA
Total Station
SET4100S
■Shift Type
▼Programs: Stakeout Traverse Calculation, Resection, etc.
Built-in alphanumeric keypad
■Calibration date: 2020 / /
*Not used since calibration.
|
| ■Included Accessories |
・Instruction manual
・Catalog
・Battery
・Charger
・Carrying case
*The items shown in the photos are all the included accessories.
Please note that items not shown in the photos are not included.
A calibration certificate is not included, but
we can issue one upon request for ¥30,000 plus tax.
●Batteries requiring replacement, as well as parts and consumables requiring replacement,
are not covered by the product's initial defect or operation warranty. Please arrange for these yourself if needed. Thank you for your understanding.
|
|
●Register coordinate data indoors, call up point numbers in the field, and perform applied surveys using coordinate values on the spot.
●Easy-to-use control panel
The large display shows alphanumeric characters, kana, and graphics. A wealth of information—including measured values, point numbers/names, 3D current coordinates, and selected modes—can be viewed at once. The control keyboard consists of soft keys, editing keys, and alphanumeric keys. Operation is interactive, and allows entry of job names, point names (codes), notes, alphanumeric characters, and kana.
●Versatile programs and coordinate memory (stores approximately 3,000 points); direct measurement of structures using reflective sheets
Resection (instrument setup)/automatic bearing setting/stakeout/offset measurement/remote distance measurement/REM measurement + raw data (SHV)/up to approximately 3,000 combined coordinate and measurement records + data management by JOB, with the option to create free records
|
| ■Condition |
■Operation tested!!
Before listing, we cleaned the following areas to ensure our customers receive a quality product.
Areas cleaned
・Exterior cleaning
・Interior cleaning
As this is a used item, it may have minor scratches from use.
・There is a horizontal line and a missing line at the top of one of the two display screens.
※The item will be delivered in the condition shown in the photos. Please purchase only if you are satisfied with its condition.
|
|
[Telescope]
Overall length: 165 mm
Effective objective aperture: 45 mm (EDM: 50 mm)
Magnification: 30×
Image: Erect
Resolution: 3″
Field of view: 1°30′
Minimum focusing distance: 1.0 m
Reticle illumination: Bright/dim selectable
Two-speed focusing knob: Yes
[Angle Measurement Unit]
Method: Photoelectric absolute rotary encoder
Accuracy: 5″
Minimum display: 10″/5″ selectable
Angle measurement time: Continuous measurement at intervals of 0.5 seconds or less
Automatic compensation: Selectable correction of horizontal and vertical angles, vertical angle only, or no correction; liquid-type dual-axis compensator; compensation range: ±3′
[Distance Measurement Unit]
Measuring range (slope distance): Reflective target: 1–80 m (using RS90N)
Compact reflective prism: 1–600 m
Single prism: 1–1,600 m
3-prism array: 1–2,100 m
9-prism array: 1–2,500 m
Distance measurement modes: Fine continuous, fine average, fine single, rapid continuous, rapid single, tracking
Minimum display: Fine measurement: 1 mm
Rapid measurement: 1 mm
Tracking measurement: 10 mm
Measurement time: Fine measurement: every 2.0 seconds (first measurement: 4.2 seconds)
Rapid measurement: every 0.7 seconds (first measurement: 2.9 seconds)
Tracking measurement: every 0.5 seconds (first measurement: 2.9 seconds)
Accuracy: With reflective target: Fine measurement ±(4 + 3 ppm × D)
Rapid measurement ±(5 + 5 ppm × D)
With reflective prism: Fine measurement ±(4 + 3 ppm × D)
Rapid measurement ±(5 + 5 ppm × D)
※(D = measured distance)
Atmospheric correction: Input by temperature/pressure or ppm value selectable
Reflective prism constant correction: +99 mm to −99 mm (1 mm increments)
Earth curvature and atmospheric refraction correction: Selectable on/off
Automatic light intensity adjustment: Yes
[General]
Data storage: Stores up to 3,000 points
Calendar clock: Yes
Printer output: Direct printing to a Centronics-compatible printer using the optional DOC46 printer cable
Keyboard: 28 conductive rubber keys (alphanumeric keys, editing keys, soft keys, illumination key, power key)
Display: Alphanumeric/kana LCD, graphic display, 120 × 64-dot matrix, 20 characters × 8 lines on both face I and face II, with backlight
Bubble sensitivity: Horizontal bubble: 30″/2 mm; circular bubble: 10′/2 mm
Optical plummet: Erect image, 3× magnification, minimum focusing distance: 0.5 m (from the tribrach base plate)
Operating temperature range: −20°C to +50°C
Trunnion height: 236 mm (193 mm from the leveling base plate)
Dimensions: 177 (W) × 165 (D) × 345 (H) mm
Weight: 5.6 kg
[Power]
Internal battery: Removable BDC35 battery
(Nickel-metal hydride battery, DC 6 V)
Continuous operating time (at 25°C): Distance and angle measurement: approx. 5.5 hours (approx. 660 points)
(measurement every 30 seconds in fine single-measurement mode)
Angle measurement only: approx. 7 hours
※Specifications are for reference only and are based on information listed on the manufacturer's website.
Some information may be inaccurate. Please contact us if you notice any errors, and we will correct them. Please use these specifications as a general reference only.
For details, please contact the manufacturer.
|
|
Ships from Kyoto
■Shipping fee (prepaid shipping only)
¥3,200 nationwide
The same shipping fee applies to Hokkaido, Okinawa, and remote islands.
※All items we ship are covered by shipping insurance.
Please contact us if the item is damaged during shipping.
If the damage can be repaired, we will arrange for repairs.
Returns are not accepted. Thank you for your understanding.
|
Please let us know if you would like a quotation or receipt.
We will accommodate your needs flexibly.
●We can issue a three-part set of documents: quotation, invoice, and delivery note.
Please provide the necessary details for issuance (billing address, delivery address, date for the company seal, etc.).
※If you need these documents, please contact us before purchasing.
|
