Please note that items not shown in the photos are not included.
●Regarding batteries and parts/consumables requiring replacement:
These are not covered under the product's initial defect or operation warranty. Please arrange for replacements if necessary. Thank you for your understanding.
■S199M4 The S199M4 is a compact optical fiber fusion splicer featuring a high-speed operating system that allows for simultaneous observation from two directions, achieving a standard fusion splice time of 25 seconds. The adoption of a 5-inch large low-reflection color monitor improves visibility even when working under sunlight. It is equipped with a white LED lamp to illuminate the V-groove, assisting in fiber placement, and also features a self-diagnostic function.
S199M4 Single to 4-fiber ribbon SMF MMF
DSF NZ-DSF
・Cladding alignment type with alignment button
・Multi-fiber batch splicing; 5-inch TFT color monitor
・High-speed heater installed; supports aerial work
・Standard battery included; supports short-fiber splicing
■Optical Fiber Stripper S-210
Capable of stripping coatings from 0.25mm fiber strands and 0.90mm optical fibers.
※Specifications are for reference only. They are based on the manufacturer's website.
There may be errors in the description. Please contact us if you notice any, and we will correct them. Please consider this as reference information only.
For further details, please inquire with the manufacturer.
About Condition
Product Specifications
■Condition
■※January 2014: Manufacturer-inspected and adjusted. Not used since inspection.
To ensure we deliver a quality product, the following cleaning was performed:
Cleaning areas:
・Exterior cleaning
・V-groove, mirror, and lens cleaning.
As this is a used product, there are minor scratches from use.
・There are repair marks on the fiber holder.
※The battery is worn out. Please note that we do not guarantee the remaining charge.
※The item is sold in the condition shown in the photos; please be satisfied with the condition before purchasing.
■S199M4
Compatible optical fiber:
・SM fiber: 4, 2, 1-fiber
・MM fiber: 4, 2, 1-fiber
・DS fiber: 4, 2, 1-fiber
Stripping length: 10mm
Average splice loss:
・SM fiber: 0.05dB or less on average
・MM fiber: 0.03dB or less on average
・DS fiber: 0.08dB or less on average
Standard splice time: 30 seconds ※When splicing 4-fiber SM fiber under standard fusion conditions
Standard heating time: 100 seconds ※When heating 40mm sleeve at room temperature
AC power input:
・Input voltage: AC85–264V (50/60Hz)
・Power consumption: Max 64W, Typical 21W
Weight:
・Main unit: 2.8kg (including monitor)
・Power supply: 0.6kg
・Battery: 0.8kg
・Carrying case: 3.8kg
Dimensions (W×D×H):
・Main unit: 150×150×150 mm
・Power supply/battery: 129×150×31 mm
・Carrying case: 410×260×390 mm
Environmental conditions:
・Operating temperature: +0 to +40℃
・Storage temperature: -30 to +60℃
※Specifications are for reference only. They are based on the manufacturer's website.
There may be errors in the description. Please contact us if you notice any, and we will correct them. Please consider this as reference information only.
For further details, please inquire with the manufacturer.
Shipping Info
Payment Info
Ships from Kyoto
■Shipping costs (Prepaid only) Flat rate nationwide: 3,200 yen
The same rate applies to Hokkaido, Okinawa, and remote islands.
※We insure all shipped items.
In the unlikely event of damage, please contact us.
If the damaged parts can be repaired, we will handle the repairs.
We do not accept returns. Thank you for your understanding.
●Please let us know if you require an estimate or receipt.
We will accommodate your needs flexibly.
●We can issue estimates, invoices, and delivery statements.
Please provide the necessary details for issuance (billing address, shipping address, date, etc.).
※If you need these, please contact us before purchasing.
Payment, returns & documents
Payment methods
Choose from the payment methods shown at checkout.
Returns & warranty
As these are used items, we cannot accept returns or exchanges for change of mind. Please test the item within 3 days of arrival and contact us if there is an initial defect. Batteries and consumables are not covered.
Quotes & receipts
We can issue quotes, invoices and receipts. Please send us the addressee details via the contact form.
