Furukawa FITEL S123M8 Optical Fiber Fusion Splicer - Up to 8 Fibers (Used)

Maintaining the slim design favored in the S122 fusion splicer, this model has been redesigned to be more robust and faster.

●Rugged design for all environmental conditions
●Slim design
●Fast splicing in 15 seconds, fast heat shrinking in 35 seconds
●Fusion splicing from trunk lines to FTTH
●Automatic fusion program selection
●Improved drop impact resistance (76cm drop test)
●Equipped with a "curl remove" function to easily remove fiber curl.
●Equipped with a fiber alignment function that automatically corrects axial misalignment.
●Supports drop cable splicing (separate drop cable splicing jig and drop cable holder required).

▼Applicable fiber＊1)　　 SM, MM, DSF, NZD, BIF/UBIF
▼Fiber cladding diameter 　　　　125μm
▼Fiber coating diameter Single fiber: 250–900μm＊2）
　　　　　　　　　　　　 Ribbon fiber thickness: 280–400μm
▼Fiber cleave length 　 　10mm
▼Average splice loss＊3) 　　 SM: 0.05dB, MM: 0.03dB
　　　　　　　　　　　 DSF: 0.08dB, NZD: 0.08dB
▼Standard splice time 15 seconds
▼Standard heat shrink time Single fiber: 35s (S922: 40mm, S921: 60mm sleeve) (pre-heat mode)
　　　　　　　　　　　　 Ribbon fiber: 35s (S924 40mm sleeve) (pre-heat mode)
▼Splice programs Max 150
▼Heat shrink programs Max 18
▼Protection sleeves Compatible with 40, 60mm
▼Proof test 1.96N (approx. 0.2kgf)
▼Fiber image magnification 28x
▼Splice data memory Max 1000
▼Dimensions 　　　　　127W x 199D x 105Hmm (excluding shock absorbers)
　　　　　　　　　　　　 159W x 231D x 130Hmm (including shock absorbers)
▼Weight 　　　　　　1.6kg (without battery)
　　　　　　　　　　　　 2.0kg (including 2 batteries)
▼Monitor 　　　　3.5-inch LCD monitor
▼Data port USB ver.2.0
▼Battery capacity＊4)　160 cycles (splice + shrink, 2 batteries)
▼Operating conditions　　 -10 to +50°C (non-condensing)
▼Storage conditions 　　　　-40 to +60°C (non-condensing)
▼Power supply 　　　　AC input 90–265V (50/60Hz)
　　　　　　　　　　　　 DC input 11–17V

＊1 Supports fibers compliant with ITU-T standards.
＊2 For 500μm, an optional 500μm single fiber holder and 4-fiber holder (500μm x 4) are required.
＊3 Splice loss values are measured under ideal conditions using the same fiber to indicate the machine's performance; it does not guarantee splice loss.
＊4 Based on a fully charged new battery at room temperature (approx. 20°C), splicing and heating once every 100 seconds. Actual cycle count varies depending on battery condition and environment.
8-fiber

※Specifications are for reference only, based on the manufacturer's website.
There may be errors in the information provided. Please contact us if you find any discrepancies so we can correct them. Please use this information as a guide only.
For more details, please contact the manufacturer.

Ships from Kyoto

■Shipping Fee (Prepaid only)
Flat rate nationwide: 3,200 yen
Shipping to Hokkaido, Okinawa, and remote islands is the same rate.



※All items shipped by our company are covered by shipping insurance.
In the unlikely event of damage, please contact us.
If the damage can be repaired, we will arrange for repairs.
Returns are not accepted. Thank you for your understanding.

●Please let us know if you require an estimate or receipt.
We will flexibly accommodate your needs.


●We can issue a set of three documents: estimate, invoice, and delivery statement.
Please provide the necessary details (billing address, shipping address, date, etc.) upon request.
※If you require these, please contact us before purchase.