|
Please let us know if you require a quote or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
|
【Operation Guaranteed】
FITEL/Furukawa Electric
Fiber Splicer S123M8
■Up to 8 cores
■Includes 4-core fiber holder
|
| ■Accessories |
・Instruction Manual (CD-R)
・Catalog
・Reinforcement Stand
・Batteries ×2 (S943B)
・Charger (S958C)
・Hard Carrying Case
※All accessories are shown in the photos.
Please note that items not shown in the photos are not included.
●Regarding batteries, rechargeable batteries, parts, and consumables that require replacement,
they are not covered by the initial product defect or operation guarantee. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
The slim design that was well received with the S122 fusion splicer has been maintained while making the model more durable and faster.
●Durable enough to withstand all environmental conditions
●Slim design
●Fast splicing in 15 seconds, fast heat-shrink in 35 seconds
●Fusion splicing from backbone to FTTH
●Automatic fusion program selection
●Improved drop impact resistance (76 cm drop test)
●Equipped with a curl removal function to easily remove fiber bending.
●Equipped with a fiber alignment function that automatically corrects axial misalignment.
●Supports drop splicing. (A separate drop splicing jig and drop holder are required.
|
| ■Condition |
■Operation has been confirmed!!
To deliver a high-quality product to our customers, we have performed the following cleaning before sale.
Cleaning areas
・Exterior cleaning
・Interior cleaning
We provide a 1-month operation guarantee.
※We will also provide after-sales support, so we look forward to orders from understanding customers.
However, as this is a used product, there are minor scratches from use.
・Total discharge count is 30221.
※The product will be delivered in the condition shown in the photos, so please purchase only if you are satisfied with the condition.
|
|
▼Applicable optical fibers*1) SM, MM, DSF, NZD, BIF/UBIF
▼Fiber outer diameter 125μm
▼Fiber coating outer diameter (single-core fiber outer diameter): 250–900μm*2)
Tape core thickness: 280–400μm
▼Fiber cutting length 10mm
▼Average splicing loss*3) SM: 0.05dB, MM: 0.03dB
DSF: 0.08dB, NZD: 0.08dB
▼Standard fusion splicing time 15 seconds
▼Standard heat reinforcement time Single-core fiber: 35 seconds (S922: 40mm, S921: 60mm sleeve) (Preheating mode)
Tape core: 35 seconds (S924 40mm sleeve) (Preheating mode)
▼Number of fusion programs Maximum 150
▼Number of heating programs Maximum 18
▼Heat reinforcement sleeve Supports 40, 60mm
▼Screening force 1.96N (approx. 0.2kgf)
▼Fiber image magnification 28x
▼Fusion data memory Maximum 1000
▼Dimensions 127W×199D×105Hmm (excluding shock-absorbing material)
159W×231D×130Hmm (including shock-absorbing material)
▼Weight 1.6kg (without battery)
2.0kg (including 2 batteries)
▼Monitor 3.5-inch LCD monitor
▼Data communication port USB ver.2.0
▼Number of continuous battery uses*4) 160 times (fusion splicing + heat reinforcement, 2 batteries)
▼Operating environment conditions -10 to +50℃ (no condensation)
▼Storage environment conditions -40 to +60℃ (no condensation)
▼Power supply AC input 90–265V (50/60Hz)
DC input 11–17V
*1 Supports optical fibers compliant with ITU-T standards.
*2 500μm requires the optional 500μm single-core fiber holder or 4-core bundle holder (500μm × 4 fibers).
*3 These values were obtained under favorable environmental conditions using the same optical fiber to demonstrate the characteristics of the fusion splicer and do not guarantee splicing loss.
*4 Using a new battery charged to 100% in a room-temperature environment (approx. 20℃), the number of times continuous fusion splicing and heat reinforcement can be performed at a pace of approximately once every 100 seconds for the fiber core. The number of uses varies depending on the battery condition and operating environment.
8-core, 8-core, 8-core, 8-core
※Specifications are for reference only. They are based on the manufacturer's website.
There may be errors in the description. Please contact us if you find any, and we will correct them. Please use them for reference only.
For more details, please contact the manufacturer.
|
|
Shipping is from Kyoto
■Shipping Fee (prepaid only)
Flat rate of 3,200 yen nationwide
The same shipping fee applies to Hokkaido, Okinawa, and remote islands.
※We insure all shipped products.
If the product is damaged, please contact us.
If the damaged area can be repaired, we will provide repair services.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you require a quote or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If required, please contact us before purchasing.
|
