|
Please let us know if you require a quote or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
|
【With Calibration Certificate】
PENTAX
Total Station
Mr. Rabbit
RS-20C
Angular accuracy: 5 seconds
■Calibration Date: September 2024
※It has not been used since calibration.
|
| ■Accessories |
・Instruction Manual
・Calibration Certificate
・Battery
・Charger
・Plumb bob
・Case
・Pin Hole + Prism ※These are free bonuses, so they may differ from the sample shown in the photo. Please understand.
※The items shown in the photo are all the accessories.
Please note in advance that items not shown in the photo are not included.
●Regarding batteries/rechargeable batteries and parts/consumables that need replacement
These are not covered by the initial product defect or operation guarantee. Please arrange them yourself if necessary. Please note this in advance.
|
|
This surveying instrument was designed with the fundamental development philosophy of "easy for anyone to use." Despite its simple operation, it is a full-featured total station that covers almost all necessary functions.
◆Easy-to-understand Japanese display
The display is designed to show as much as possible in Japanese with easy-to-understand icons. The guide messages indicating the operating procedures are displayed in katakana.
◆Simple key operation
There are only 5 operation keys, and the key operations for measurement have been minimized as much as possible. Horizontal angles can be measured immediately just by turning on the power, and horizontal distances can be measured simply by swinging the telescope (setting the height origin).
◆Easy operation even in dark places
The key functions are displayed on the illuminated display, so you can see at a glance which key to operate, and key operations can be easily performed even in dark places. Of course, it is also easy to operate while wearing work gloves.
◆Equipped with a wealth of functions
In addition to horizontal distance and slope distance, it is equipped with various applied measurement functions such as stakeout, coordinate functions, coordinate measurement, etc.
●Base Type: Shift type
●Angular Accuracy: 5 seconds
●Angular Measurement Method: Incremental angular measurement
●Distance Measurement Accuracy ±(3mm + 3ppm×D)m.s.e.
|
| ■Condition |
■This product has been operationally tested!!
To deliver a good product to our customers, we have performed the following cleaning before sale.
Cleaning Areas
・Exterior Cleaning
・Interior Cleaning
However, as it is a used product, there are small scratches due to use.
※The product will be delivered in the condition shown in the photo, so please purchase only after being satisfied with the condition.
|
|
▼Telescope
Image: Erect image (Prism erect system)
Magnification: 30x
Effective Objective Diameter: 45mm (EDM45mm)
Resolving Power: 3″
Field of View: 2.6% (1°30′)
Minimum Focusing Distance: 0.85m
▼Distance Measurement Unit
Distance Range: Mini Prism…500m (600m)
1 Prism…800m (1000m)
3 Prisms…1200m (1500m)
Accuracy: ±(3mm + 3ppm×D)m.s.e.
※±(3mm + 10ppm×D)m.s.e.
※When automatic meteorological correction is applied
Minimum Readout Value: Normal Distance…1mm
High-Speed Distance…10mm, 1mm
Distance Measurement Time: Normal Distance…Approx. 2.0 seconds
High-Speed Distance…Approx. 0.5 seconds (cm)
Approx. 0.8 seconds (mm)
Measurement Method
Normal: Automatic Repeated Measurement
Shots: Select 1–9
Maximum Slope Distance: 3,000m
Meteorological Correction: Temperature…Input in 1°C increments
(Optional) Barometric Pressure…Input in 1mmHg increments
Prism Constant Correction: 0mm, -30mm, Numeric Input Selection
Atmospheric and Spherical Correction: Correction On (or Off)
Atmospheric and Spherical Correction: 0.14 (0.2)
Distance Measurement Unit: Meters
Applied Measurement Functions: Stakeout Measurement
N-Point Linear Measurement
Width Stakeout Measurement
Remote Elevation Measurement (REM)
Opposite Side Measurement (RDM)
Coordinate Measurement
Resection
Reverse Stakeout Measurement
▼Horizontal Angle Unit
Horizontal Angle Method: Incremental Rotary Encoder
Detection Method: Single-Side Detection (for both horizontal and vertical angles)
Minimum Display: 20″ (Switchable to 10″)
Horizontal Angle Accuracy: Standard Deviation 10″
Distance Measurement Time: Approx. 0.2 seconds (Continuous Measurement)
Dial Diameter: 79mm
Measurement Mode
Horizontal Angle: Right-Hand Angle, Left-Hand Angle, Hold
Vertical Angle: Zenith 0°, Horizontal 0°, % Display, Compass Scale
▼Display Unit
Method: 12-Character 2-Line Dot Character + Icon (Segmented), Illuminated
Display: Single-Side
▼Spirit Level Sensitivity
Vertical and Horizontal Spirit Levels: 40″/2mm
Circular Spirit Level: 8′/2mm
▼Centering Telescope
Image: Erect image
Magnification: 3×
Focusing Range: 0.5m to ∞
▼Vertical Axis / Base Type
Vertical Axis: Single Axis
Base: Detachable
▼Size/Weight
Main Unit: Width 162 × Height 338 × Length 154mm / 5.0kg
Case: Width 260 × Height 250 × Length 440mm / 3kg
※Specifications are for reference only. They are listed based on the manufacturer's website.
There may be incorrect information. Please contact us if you find any, and we will correct it. Please consider them as reference only.
For details, please contact the manufacturer.
|
|
Shipping is from Kyoto
■Shipping Fee (Prepaid Only)
Flat Rate Nationwide: 3,200 yen
Shipping to Hokkaido, Okinawa, and remote islands is also the same fee.
※We insure all shipped products.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Please note this in advance.
|
●Please let us know if you require a quote or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If required, please contact us before purchase.
|
