|
| ■Product Name |
|
【Calibration Certificate Included】
Nikon
Total Station
NST-305C
■Shift Type, Dual-Sided LCD Display
■Calibration Date: April 1, 2023
※Has not been used since calibration
|
| ■Accessories |
|
・Instruction Manual
・Calibration Certificate
・Battery
・AC Adapter
・Carrying Case
・Pin Pole + Prism ※These are free bonus items, so they may differ from the sample in the photo. Thank you for your understanding.
※Everything shown in the photos is included.
Anything not shown in the photos is not included; please be aware of this in advance.
●Regarding batteries that require replacement and parts/consumables that need replacing:
These are not covered by our initial defect or operational warranty. Please arrange for these yourself if necessary. Thank you for your understanding.
|
|
●Large graphic LCD display that is easy to read and understand with Kanji and Kana support.
●Reliable, powerful water resistance (clears JIS protection grade 6, water-resistant type).
●High-capacity battery allows for approximately 6.5 hours of continuous use when using both distance and angle measurement.
●Large-capacity memory allows for recording approximately 10,000 data points on the device.
■Extended Measurement Range
Can measure distances up to 1,000m using a mini prism, which is frequently used at surveying sites. Also capable of measuring up to 2,000m with a single-prism reflector.
■Achieves both high precision and high-speed measurement
The precision measurement mode achieves high precision of +/- (3+2ppm・D)mm, with measurement taking approximately 1.6 seconds for both the first and subsequent readings. The high-speed measurement mode enables rapid measurement of approximately 1.0 second continuously (approx. 1.4 seconds for the first reading) at +/- (10+3ppm・D)mm.
※The pin pole prism in the photo is a bonus item.
Items provided may vary depending on inventory status.
Please note that the color or manufacturer may differ from those in the photo,
as these are provided as a courtesy.
|
| ■Condition |
■This product has been operationally tested!!
To ensure we deliver a high-quality product to our customers, we have performed the following cleaning:
Cleaning areas:
・Exterior cleaning
・Internal cleaning
However, since this is a used product, there are small scratches from use.
※The item is sold in its condition as shown in the photos, so please ensure you are satisfied before purchasing.
|
【Basic Functions】Horizontal angle, vertical angle, slope distance, horizontal distance, height difference, slope (%),
Battery level display, Reticle/LCD display illumination
【Setting Functions】Minimum display unit (distance/angle), measurement mode (precision/high-speed), number of measurements, temperature/pressure input, curvature/refraction correction, scale correction, auto-cut-off time (unit/EDM), power-saving mode, prism constant, vertical angle tilt correction ON/OFF, vertical angle 0-direction, coordinate mode switching, X-axis direction selection, horizontal angle setting, interface (RS-232C)
【Additional Functions】Measurement value averaging, slope reduction, station point setting (resection), stakeout functions (coordinates, distance, division, offset), Remote Elevation Measurement (REM), Remote Distance Measurement (RDM) (continuous/radial), station origin coordinate setting, target coordinate measurement, sighting No. input, line offset, offset observation (tape input, angle offset, 2-point target, line + horizontal angle, horizontal distance input, corner point, cylinder center, slope distance addition)
【Applied Functions】Curve offset, vertical plane measurement, slope measurement, surveying calculations (coordinates → angle/distance, angle/distance → coordinates, area, offset point), data recording (angle, distance, coordinates)
|
Telescope 【Image】Erect
【Length】157mm
【Effective Aperture】45mm (EDM: 50mm)
【Magnification】33×
【Field of View】1° 20'
【Resolving Power】2.5"
【Minimum Focus Distance】1.3m
【Reticle Illumination】None
Distance Measurement Section 【Measurement Range】
Reflective target (5cm square): 5–100m
Mini prism: 1,000m
Single-prism: 2,000m
【Measurement Precision】
Precision mode: +/- (3+2ppm・D)mm
High-speed mode: +/- (10+3ppm・D)mm
【Display】 9,999.999m
【Measurement Time】
Precision mode: approx. 1.6s (first reading approx. 1.6s) 1mm display
High-speed mode: approx. 1.0s (first reading approx. 1.4s) 10mm display
【Atmospheric Correction】
Temp range: -20 to +50°C
Pressure range: 533 to 1,332hPa
【Prism Constant Setting】 -999 to +999mm
Angle Measurement Section 【Method】Optical detection using an incremental encoder
【Circle Diameter】79mm (both horizontal and vertical)
【Precision】Within 5"
【Minimum Reading Switchable】5"/10"/20" switchable (both horizontal and vertical)
【Horizontal Angle Double-Reading Function】Available
【Automatic Vertical Compensation】Capacitive detection (compensation range: +/- 3' in all directions from vertical)
【Fine Motion】Coaxial clamp fine motion (both horizontal and vertical)
Level Sensitivity 【Circular Level】10'/2mm
【Plate Level】30"/2mm
Optical Plummet 【Image】Erect
【Magnification】3×
【Field of View】5°
【Focus Range】0.5m–∞
Display 【Format】Erect/Inverted graphic LCD (128×64 dots)
With backlight
Data Recording 【Internal Memory】Recording capacity: approx. 10,000 points
【Edit Functions】Max 10 job sites
Unit 【Dimensions (approx.)】173(D)×168(W)×335(H)mm
【Weight (approx.) (including internal battery)】5.1kg
Internal Battery 【Output Voltage】DC7.2V
【Operating Time (approx.) (100% charge, at 25°C ambient temp)】
16 hours (continuous distance/angle measurement)
27 hours (distance measurement every 30s)
30 hours (angle measurement only)
【Weight (approx.)】0.4kg [BC-65 (Ni-MH)]
Charger (Q-75D) 【Input Voltage】AC100V
【Frequency】50/60Hz
【Charging Time】approx. 2.5 hours (100% charge)
【Weight】approx. 0.4kg
Case 【Weight】approx. 2.4kg
※Specifications are for reference only. Information is based on the manufacturer's website.
There may be inaccuracies. Please contact us and we will correct them. Consider this information for reference purposes only.
Please contact the manufacturer for detailed inquiries.
|
|
Ships from Kyoto
■Shipping Cost (Prepaid only)
Flat rate nationwide: 3,200 JPY
Shipping to Hokkaido, Okinawa, and remote islands is also the same rate.
※All items shipped by our company are covered by shipping insurance.
In the unlikely event of damage, please contact us.
If the damage can be repaired, we will provide repair services.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you require an estimate or receipt.
We will flexibly accommodate your requirements.
●We can issue estimates, invoices, and delivery slips (a set of 3).
Please provide necessary details for issuance (billing party, shipping address, date of seal, etc.).
※If needed, we appreciate it if you could contact us before purchase.
|
