KEYENCE Digital Fiber Sensor FS-V10 Series Fiber Amplifier, Cable Type, Main Unit, NPN, FS-V11 | Factory Automation Equipment, IJP, Laser Markers, Comfort Makers, Markers, Inkjet Printers [Used]

Please let us know if you would like an estimate or receipt.
We will accommodate your request flexibly to suit your circumstances.

▼Output type: NPN output

▼Light source: Red LED

▼Response time: 250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO)

▼Operating mode: Light-ON/Dark-ON, switch selectable

▼Indicators: Output indicator…Red LED
　　　　 Digital LED monitor…4-digit, 7-segment red LED
　　　　 Bar LED monitor…1 orange LED and 6 green LEDs

▼Timer function: Off-delay 40 ms /Off-delay 10 ms /Timer OFF

▼Control output: NPN open collector, max. 100 mA (40 V or less), residual voltage 1 V or less

▼Protection circuits: Reverse connection protection, overcurrent protection, surge absorption

▼Expandable sub-units: Up to 16 units (up to 17 units total, including the main unit)*1

▼Number of units with mutual interference prevention: FINE: 4 units; TURBO/SUPER: 8 units

▼Ratings: Supply voltage: 12–24 V DC ±10%, ripple (P-P): 10% or less*2
　　　　　 Current consumption: 50 mA or less
　　　　　　Environmental resistance: Ambient illumination: Incandescent lamp: 10,000 lux or less; sunlight: 20,000 lux or less
　　　　　 Ambient operating temperature: -10 to +55 ℃ (non-freezing)*2
　　　　　 Ambient operating humidity: 35–85% RH (non-condensing)
　　　　　 Vibration resistance: 10–55 Hz, 1.5 mm double amplitude, 2 hours in each of the X, Y, and Z directions
　　　　　 Shock resistance: 500 m/s2, 3 times in each of the X, Y, and Z directions

▼Weight: Approx. 80 g (with 2 m cable)

*1 When adding units, the ambient operating temperature varies depending on the conditions below. Always mount the units on a DIN rail (attached to a metal plate), and keep the output current at 20 mA or less. When adding 3–10 units: -10 to +50℃; when adding 11–16 units: -10 to +45℃
*2 The FS-V12/V10 cannot be used by itself.

※Specifications are provided for reference only and are based on the manufacturer's website.
Some information may be incorrect. Please contact us if you find any errors, and we will correct them. Please use this information as a general guide only.
For details, please contact the manufacturer.

Ships from Kyoto

■Shipping fee (prepaid only)
¥1,200 nationwide
The same shipping fee applies to Hokkaido, Okinawa, and remote islands.



※All items shipped by our company are covered by shipping insurance.
Please contact us if the item is damaged in transit.
If the damage can be repaired, we will arrange for a repair.
Returns are not accepted. Thank you for your understanding.

●Please let us know if you would like an estimate or receipt.
We will accommodate your request flexibly to suit your circumstances.


●We can issue a set of three documents: an estimate, invoice, and delivery slip.
Please provide the details required for issuance (billing address, mailing address, date of stamp, etc.).
※If you need these documents, please contact us before purchasing.