|
Please let us know if you would like an estimate or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
【Diagnostic Test Passed】
Anritsu
Access Master
MT9082A-051
■SMF: 1.55 μm OTDR
■Wavelength: 1550±30 μm
■Distance range: 0.5, 1, 2.5, 5, 10, 25, 50, 100, 200 km
■Optical power meter and light source functions
OP.010 Protector
|
| ■Included Accessories |
※The items shown in the photos are all that is included.
Please note that items not shown in the photos are not included.
●Batteries and other parts/consumables that require replacement
・Although shown in the photo, the battery is worn out and has therefore been removed from the included accessories. For an additional ¥49,800 plus tax, you can replace it with a battery in like-new condition.
Initial defects and operation are not covered by the product warranty. Please arrange for any required items yourself. Thank you for your understanding.
|
|
Multiple measurement functions in a compact unit
The most common model used for installation and maintenance!
Meets a wide range of field measurement requirements.
Optical fiber line evaluation primarily involves assessing line loss with an optical pulse tester and measuring optical loss with a light source and optical power meter. The MT9082A can house an optical pulse tester, light source, optical power meter, and visible light source all in one compact, lightweight unit. It provides all the measurement functions needed to install and maintain optical fiber, eliminating the need to bring multiple instruments to the work site.
●Optical Power Meter Option
There are three types of power meters. With the high-power sensor option, measurements up to +30 dBm are possible.
●Visible Light Source Option
Used for visual identification of optical fiber cores and locating faults.
Optical pulse testing/light source ports
A range of wavelengths is available to suit various applications.
●Short dead zone of 1 m or less
Improved analysis performance for short-distance fibers
The MT9082A achieves an event dead zone of 1 m. It makes it possible to analyze connections inside buildings and identify fault locations that could not previously be analyzed.
●Dynamic range of up to 38.5 dB
Supports fiber lengths over 100 km
The MT9082A has a dynamic range of up to 38.5 dB, allowing evaluation of optical fibers longer than 100 km.
●Standard-equipped stabilized light source
The optical pulse tester port can also be used as a stabilized light source for optical power measurements.
●Save measurement results and display them in a results list
Measurement results can be recorded in a table and saved as a text file, which can be opened in spreadsheet software on a PC.
●6.4-inch TFT color LCD
Displays information on a large screen with large text.
●Compact and lightweight
Compact 2.2 kg unit (including battery).
|
| ■Condition |
■Tested and confirmed to be working!
To ensure we deliver a quality product, we performed the following cleaning before sale.
Areas cleaned
・Exterior cleaning
・Interior cleaning
As this is a used item, it may have minor scratches from use.
・The self-test and self-diagnosis passed. The unit can be used without any issues.
※The item will be delivered in the condition shown in the photos. Please purchase only if you are satisfied with its condition.
|
|
[Main Unit]
Wavelength: 1550±30 nm
Fiber under test: 10/125 μm single-mode fiber (ITU-T G.652)
Optical connectors: FC, SC, DIN, HMS-10/A, ST, LC (replaceable, PC type)
FC, SC (APC type)
Distance range: 0.5, 1, 2.5, 5, 10, 25, 50, 100, 200 km
Pulse width: 3 ns, 10 ns, 20 ns, 50 ns, 100 ns, 200 ns, 500 ns, 1 μs, 2 μs, 4 μs, 10 μs, 20 μs
Dynamic range: 37 dB (1.55 μm)
Dead zone (backscattered light) (IOR = 1.500000): ≤8.0 m (1.55 μm)
Dead zone (backscattered light) (IOR = 1.500000): ≤5.5 m (1.55 μm)
Dead zone (Fresnel reflection) (IOR = 1.500000): ≤1 m, ≤0.8 m (typical)
Marker resolution (IOR = 1.500000): 0.05–400 m
Sampling resolution (IOR = 1.500000): 0.05–40 m
Number of sampling points: Standard mode: 5001
High-density mode: 20001 or 25001
Distance measurement accuracy: ±1 m ±3 × measured distance × 10−5 ± marker resolution
Loss measurement accuracy (linearity): ±0.05 dB/dB or ±0.1 dB (whichever is greater)
Return loss accuracy: ±2 dB
[Standard Stabilized Light Source and Standard Optical Power Meter]
▼Stabilized Light Source Function
Compatible fiber: SM fiber (ITU-T G652), PC polish
Optical connector: Shared with OTDR (same port)
Center wavelength: 1550±30 nm
Spectral half-width: 5 nm (1310 nm), ≤1 nm (1383 nm), ≤10 nm (1490/1550/1625 nm),
≤3 nm (1650 nm), ≤5 nm (850 nm/1300 nm)
Optical output power: −5±1.5 dBm, short-term stability: ≤0.1 dB
Modulation frequency: 270 Hz/1 kHz/2 kHz ±1.5%, warm-up time: 10 minutes (after optical output is turned on)
Laser safety: Same classification as the optical pulse tester
▼Optical Power Meter Function
Compatible fiber: SM fiber (ITU-T G652), PC polish
Optical connector: Shared with OTDR
Wavelength settings: 1310/1550/1625/1650 nm
Optical power measurement range: −50 to −5 dBm (peak power), absolute maximum input rating: +10 dBm
Measurement accuracy: ±6.5% *15
Loss measurement: Displays the difference from the reference value; reference value setting range: −99.9 to +40.0 dBm
Results list display
[Other]
Display: 6.5-inch TFT color LCD (640 × 480 dots, backlit, transmissive)
Power supply: DC: rated 12 V
AC: rated 100–240 V, input voltage range: 90–264 V, 50/60 Hz (when using the dedicated AC adapter)
Battery: Dedicated lithium-ion battery
Power consumption: Max. 20 W (when charging), typical 5 W (backlight low, sweep stopped)
Dimensions/weight: 270 (W) × 165 (H) × 61 (D) mm; 2.2 kg
※Specifications are provided for reference only and are based on information from the manufacturer's website.
Some information may be incorrect. Please contact us if you notice any errors, and we will correct them. Please use this information as a general reference only.
For details, please contact the manufacturer.
|
Ships from Kyoto
■Shipping (prepaid only)
Free shipping nationwide!
Free shipping to Hokkaido, Okinawa, and remote islands as well.
※All items shipped by our company are insured.
Please contact us if the item is damaged in transit.
If the damaged part can be repaired, we will arrange a repair.
Returns are not accepted. Thank you for your understanding.
|
Please let us know if you would like an estimate or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: an estimate, invoice, and delivery note.
Please provide the necessary details for issuance (billing address, delivery address, date for the seal, etc.).
※If you need these documents, please contact us before purchasing.
|
