Anritsu Microwave Repeater Checker MS75B + Power Meter ML73B [Used]

Please let us know if you require an estimate or receipt.
We will accommodate your needs flexibly.

【Power Meter】*1, *2
(Indicator)
Frequency range: Depends on power sensor frequency range (10 MHz to 14 GHz)
Measurement level: -20 to +10 dBm
Measurement range (full scale): -10 dBm (0.1 mW), -5 dBm (0.3 mW), 0 dBm (1 mW), +5 dBm (3 mW), +10 dBm (10 mW)
Accuracy: ±3% of full scale
Calibration oscillator: 50 MHz, output level: 0 dBm, connector: N
(Power Sensor)
Frequency range: 10 MHz to 14 GHz
Input impedance: 50 Ω
VSWR: ≤1.4
Maximum power: +22 dBm (150 mW)
Input connector: N
【Frequency Counter】
(Frequency range)
Input 1: 10 Hz to 200 MHz, Input 2: 200 MHz to 18 GHz
(Sensitivity)
Input 1: 50 mVrms, Input 2: -22 dBm (200 MHz to 14 GHz), -15 dBm (14 to 18 GHz)
Resolution: 0.1, 1, 10, 100 Hz, 1, 10, 100 kHz, 1 MHz (display digits: 12)
Measurement accuracy: ±1 count ± time base accuracy
(Input impedance)
Input 1: ≥1 MΩ/≤40 pF, 50 Ω; Input 2: 50 Ω
(Coupling/Input connector)
Input 1: AC (BNC type), Input 2: DC (N type)
FM tolerance (Input 2): 25 MHz p-p (200 to 500 MHz), 50 MHz p-p (500 MHz to 18 GHz)
【Power】0/60 Hz, ≤100 VA
【Dimensions/Weight】460 (W) x 180 (H) x 370 (D) mm, ≤15 kg

*1: Power sensor calibration factor accuracy is ±5% (10 MHz to 10 GHz), ±7% (10 to 14 GHz)
*2: During power measurement, errors occur due to mismatching, which vary according to the power sensor VSWR (ρ) as shown in Figure 1.

※Specifications are for reference only. They are based on the manufacturer's website.
There may be inaccuracies. If you notice any, please contact us and we will correct them. Please use these as a guide only.
For further details, please contact the manufacturer.

Ships from Kyoto

■Shipping Fee (Prepaid only)
Flat rate 3,200 JPY nationwide
The same shipping rate applies to Hokkaido, Okinawa, and remote islands.


※We insure all items we ship.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will handle the repair.
We do not accept returns. Thank you for your understanding.

●Please let us know if you require an estimate or receipt.
We will accommodate your needs flexibly.

●We can issue a 3-part document set consisting of an estimate, invoice, and delivery note.
Please provide the necessary details for issuance (billing address, shipping address, date for the seal, etc.).
※If you require these documents, please contact us before purchase.