Keyence ML-G9300 CO2 Laser Marker - ML-G9321 Vertical Fine-Line Head, with Marking Builder Software (Used)

High-Output 30W
Highly Efficient Laser Excitation
Newly Developed WG Excitation Method
The WG (waveguide) excitation method guides the laser beam inside the oscillator with alumina-based ceramics, limiting the excitation area and reducing the distance between electrodes to achieve higher efficiency and stability, creating a completely new type of laser oscillator.
It generates high power of 30W, 2.5 times higher than conventional models.

High-Speed Printing
Reduces printing cycle time to less than 1/2
High-speed scanner
A high-speed scanner motor was developed to maximize the performance of the 〈WG excitation method〉. The optimally tuned scanner motor enables ultra-fast printing.

Follows High-Speed Lines
It has significantly improved printing capabilities not only for stationary products but also for products moving at high speeds on production lines.
It leaves ultra-fast, clear prints on plastic bottles, cartons, wires, and more.

Printing Laser
　 CO2 Laser: Class 4 (Wavelength: 10.6μm)
　 Average Output: 30W
Guide Laser
　 Semiconductor Laser: Class 2 (Wavelength: 650nm)
Output: 1.0mW
Guide Light: LED Pointer (Green)
Marking Area: 110mm
Working Distance: 208±2mm
Printing Resolution: 2μm
Scan Speed: 12000mm/s
Line Speed: 240m/min
Marker Installation Direction: All Directions
Installation Alignment
　 Guide Laser: Character (Single)/Character (Continuous)/Area Frame and Crosshair (Continuous)/Workpiece Image (Continuous)
　 Distance Pointer: LED Pointer + Guide Laser Beam
Marker Cable Length: 5m
Cooling Method: Forced Air Cooling
Power Supply Voltage: AC100～120/200～240V±10% (50/60Hz) Max 13A
Power Consumption
　 Max 1200VA (AC100～120V)/
　 Max 1500VA (AC200～240V)
Environmental Resistance
　 Storage Ambient Temperature: -10～+60℃ (No Condensation/Freezing)
　 Operating Ambient Temperature: 0～+40℃
　 Operating Ambient Humidity: 30～85% (No Condensation)
Mass
　 Controller: 9.8kg
　 Marker: Vertical 13.8kg

※Specifications are for reference only. Listed based on the manufacturer's website.
There may be incorrect information. Please contact us if you find any errors, and we will correct them. Please use this information for reference only.
For more details, please contact the manufacturer.

The shipping area is Kyoto

■Shipping Fees (Prepaid Only)
As this is a large item, shipping fees vary by region.
[Hokkaido] 12,000 yen 【Hokkaido】
[Tohoku] 9,500 yen 【Aomori, Iwate, Akita, Miyagi, Yamagata, Fukushima】
[Kanto] 7,700 yen 【Ibaraki, Tochigi, Gunma, Saitama, Chiba, Tokyo, Kanagawa, Yamanashi】
[Shinetsu] 7,700 yen 【Niigata, Nagano】
[Hokuriku] 6,500 yen 【Toyama, Ishikawa, Fukui】
[Tokai] 6,500 yen 【Gifu, Shizuoka, Aichi, Mie】
[Kansai] 6,000 yen 【Shiga, Kyoto, Osaka, Hyogo, Nara, Wakayama】
[Chugoku] 6,500 yen 【Tottori, Shimane, Okayama, Hiroshima, Yamaguchi】
[Shikoku] 6,500 yen 【Tokushima, Kagawa, Ehime, Kochi】
[Kyushu] 8,500 yen 【Fukuoka, Saga, Nagasaki, Oita, Kumamoto, Miyazaki, Kagoshima】
[Okinawa] 12,000 yen 【Okinawa】
※Additional shipping fees apply for delivery to remote islands. Please contact us before purchasing.



※All shipped products are covered by shipping insurance.
In the event of damage, please contact us.
If the damaged area can be repaired, we will provide repair services.
Returns are not accepted. Thank you for your understanding.

●Please let us know if you require a quote or receipt.
We will accommodate your needs flexibly.


●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If required, please contact us before purchasing.