Keyence ML-G9300 CO2 Laser Marker - ML-G9311 Vertical Head, with Marking Builder Software (Used, Good Condition)

High-Output 30W
High-Efficiency Laser Excitation
Newly Developed WG Excitation Method
The WG (waveguide) excitation method guides the laser beam inside the oscillator using alumina-based ceramics, limiting the excitation area and reducing the distance between electrodes to achieve higher efficiency and stability, creating a completely new type of laser oscillator.
It generates high power of 30W, 2.5 times higher than conventional models.

High-Speed Printing
Reduces printing cycle time by more than half
High-speed scanner
A high-speed scanner motor was developed to maximize the performance of the WG excitation method. The optimally tuned scanner motor enables ultra-fast printing.

Keeps Up with High-Speed Lines
It has significantly improved printing capabilities not only for stationary products but also for products moving at high speeds on production lines.
It leaves ultra-fast, clear markings on PET bottles, cartons, wires, and more.

Marking Laser
　 CO2 Laser: Class 4 (Wavelength: 10.6μm)
　 Average Output: 30W
Guide Laser
　 Semiconductor Laser: Class 2 (Wavelength: 650nm)
Output: 1.0mW
Guide Light: LED Pointer (Green)
Marking Area: 110mm
Working Distance: 208±2mm
Printing Resolution: 2μm
Scan Speed: 12000mm/s
Line Speed: 240m/min
Marker Installation Direction: All Directions
Setup Conditions
　 Guide Laser: Character (Single)/Character (Continuous)/Area Frame and Crosshair (Continuous)/Workpiece Image (Continuous)
　 Distance Pointer: LED Pointer + Guide Laser Beam
Marker Cable Length: 5m
Cooling Method: Forced Air Cooling
Power Supply Voltage: AC100～120/200～240V±10% (50/60Hz) Max 13A
Power Consumption
　 Max 1200VA (AC100～120V)/
　 Max 1500VA (AC200～240V)
Environmental Resistance
　 Storage Ambient Temperature: -10～+60°C (No Condensation/Freezing)
　 Operating Ambient Temperature: 0～+40°C
　 Operating Ambient Humidity: 30～85% (No Condensation)
Mass
　 Controller: 9.8kg
　 Vertical Marker: 13.8kg

*Specifications are for reference only. They are listed based on the manufacturer's website.
There may be errors in the listing. Please contact us if you find any, and we will correct them. Please use the information for reference only.
For more details, please contact the manufacturer.

Shipping is from Kyoto

■Shipping Fees (Prepaid Only)
Due to the large size of the product, shipping fees vary by region.
[Hokkaido] 12,000 yen 【Hokkaido】
[Tohoku] 9,500 yen 【Aomori, Iwate, Akita, Miyagi, Yamagata, Fukushima】
[Kanto] 7,700 yen 【Ibaraki, Tochigi, Gunma, Saitama, Chiba, Tokyo, Kanagawa, Yamanashi】
[Shinetsu] 7,700 yen 【Niigata, Nagano】
[Hokuriku] 6,500 yen 【Toyama, Ishikawa, Fukui】
[Tokai] 6,500 yen 【Gifu, Shizuoka, Aichi, Mie】
[Kansai] 6,000 yen 【Shiga, Kyoto, Osaka, Hyogo, Nara, Wakayama】
[Chugoku] 6,500 yen 【Tottori, Shimane, Okayama, Hiroshima, Yamaguchi】
[Shikoku] 6,500 yen 【Tokushima, Kagawa, Ehime, Kochi】
[Kyushu] 8,500 yen 【Fukuoka, Saga, Nagasaki, Oita, Kumamoto, Miyazaki, Kagoshima】
[Okinawa] 12,000 yen 【Okinawa】
*Additional shipping fees are required for delivery to remote islands. Please contact us before purchasing.



*We provide shipping insurance for all products shipped.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will provide repair services.
Returns are not accepted. Thank you for your understanding.

●Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.


●We can issue a three-part set of a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
*If required, please contact us before purchasing.