【While Supplies Last 】Keyence Laser Marker ML-G9300 Head ML-G9310 Standard Specifications FA Equipment 【Used】keyence・CO2 Laser Marker・Laser Cutter Co2 Laser Marker Laser Cutter Laser Processing Laser Engraver Engraving Machine Machine Tool

●Please let us know if you require an invoice.
We will accommodate your needs flexibly.

※The dedicated software marking builder is available separately for 200,000 yen.

High output 30W
High-efficiency laser excitation
Newly developed WG excitation method
The WG (waveguide) excitation method guides the laser beam inside the oscillator with alumina-based ceramics, limiting the excitation area and reducing the distance between electrodes to achieve higher efficiency and stability, creating a completely new type of laser oscillator method.
It generates high power of 30W, 2.5 times higher than conventional models.

High-speed printing
Reduces printing cycle time by more than half
High-speed scanner
We have developed a high-speed scanner motor that maximizes the performance of the 〈WG excitation method〉. The optimally tuned scanner motor enables ultra-fast printing.

Keeps up with high-speed lines
It has significantly improved printing capabilities not only for stationary products but also for products moving at high speeds on production lines.
It leaves ultra-fast, clear prints on plastic bottles, cartons, wires, and more.

Printing laser
　 CO2 laser: Class 4 (Wavelength: 10.6μm)
　 Average output: 30W
Guide laser
　 Semiconductor laser: Class 2 (Wavelength: 650nm)
Output: 1.0mW
Guide light: LED pointer (Green)
Marking area: 110mm
Working distance: 208±2mm
Printing resolution: 2μm
Scan speed: 12000mm/s
Line speed: 240m/min
Marker installation direction: All directions
Installation setup
　 Guide laser: Character (1 time)/Character (continuous)/Area frame and crosshair (continuous)/Work image (continuous)
　 Distance pointer: LED pointer + Guide laser beam
Marker cable length: 5m
Cooling method: Forced air cooling
Power supply voltage: AC100～120/200～240V±10% (50/60Hz) Max 13A
Power consumption
　 Max 1200VA (AC100～120V)/
　 Max 1500VA (AC200～240V)
Environmental resistance
　 Storage ambient temperature: -10～+60℃ (No condensation or frost)
　 Operating ambient temperature: 0～+40℃
　 Operating ambient humidity: 30～85% (No condensation)
Weight
　 Controller: 9.8kg
　 Marker: Horizontal 13.3kg

※Specifications are for reference only. Listed based on the manufacturer's website.
There may be errors in the description. Please contact us if you find any, and we will correct them. Please use this information for reference only.
For more details, please contact the manufacturer.

Shipping area is Kyoto

■Shipping fees (Prepaid only)
Due to the large size of the product, shipping fees vary by region.
[Hokkaido] 12,000 yen 【Hokkaido】
[Tohoku] 9,500 yen 【Aomori, Iwate, Akita, Miyagi, Yamagata, Fukushima】
[Kanto] 7,700 yen 【Ibaraki, Tochigi, Gunma, Saitama, Chiba, Tokyo, Kanagawa, Yamanashi】
[Shinetsu] 7,700 yen 【Niigata, Nagano】
[Hokuriku] 6,500 yen 【Toyama, Ishikawa, Fukui】
[Tokai] 6,500 yen 【Gifu, Shizuoka, Aichi, Mie】
[Kansai] 6,000 yen 【Shiga, Kyoto, Osaka, Hyogo, Nara, Wakayama】
[Chugoku] 6,500 yen 【Tottori, Shimane, Okayama, Hiroshima, Yamaguchi】
[Shikoku] 6,500 yen 【Tokushima, Kagawa, Ehime, Kochi】
[Kyushu] 8,500 yen 【Fukuoka, Saga, Nagasaki, Oita, Kumamoto, Miyazaki, Kagoshima】
[Okinawa] 12,000 yen 【Okinawa】
※Additional shipping fees apply for delivery to remote islands. Please contact us before purchasing.



※We insure all shipped products.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Thank you for your understanding.

●Please let us know if you require a quote or invoice.
We will accommodate your needs flexibly.


●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal date, etc.).
※If required, please contact us before purchasing.