|
| ■Product Name |
|
【One unit available】【Wide-area specification】KEYENCE
Fully air-cooled, ultra-compact YVO4
Laser Marker
Wide-area specification MD-V9620A
|
| ■Included Accessories |
・User's manual
・Power cable
・AC adapter
・Key
※The items shown in the photos are all the included accessories.
Please note that items not shown in the photos are not included.
※The dedicated Marking Builder software can be provided separately for ¥200,000
・The laser power cable, temperature control cable, and head control cable shown in the photos are not included. Please purchase them separately.
●Batteries that need replacing, as well as parts and consumables that need replacing
Are not covered by the product's initial defect or operation warranty. Please arrange for these yourself if needed. Thank you for your understanding.
|
|
●Developed a laser oscillator and optical system that prioritize beam quality
Enables exceptionally clear marking unlike anything seen before, with sharp outlines and uniform marking without unevenness. Even extremely small characters can be rendered beautifully.
●Fully air-cooled system
No cooling water required, significantly reducing the cost and effort of maintaining ion-exchange resin, filters, and other components.
●Outstandingly beautiful marking
Precisely delivers a perfectly circular laser beam. Achieves marking comparable to silk-screen printing.
●High stability
Achieves laser power stability of ±2%. Enables uniform marking without unevenness.
|
| ■Condition |
This is a used item and has minor scratches from use.
The product was operating normally.
However, as this is a highly precise instrument, please contact the manufacturer for adjustments and setup.
※Maintenance and repair costs are the customer's responsibility.
※The item is in the condition shown in the photos.
We welcome orders from customers who understand this.
※Please refrain from purchasing if you are particular about the item's condition.
※The item will be delivered in the condition shown in the photos, so please purchase only if you accept this.
■We do not provide support for using the dedicated Marking Builder software.
We provide no warranty whatsoever, including for operation or circuit board failures.
All matters relating to menu settings are excluded from our liability, including cases where the software cannot be used, communication is not possible, or settings cannot be configured.
We are exempt from liability for defects. If you configure the settings yourself, you do so at your own risk. Please research how to use it yourself.
※Specialized knowledge is required for tasks such as registering menus.
We cannot provide any support.
Thank you for your understanding.
|
|
▼Marking Laser
YVO4 laser: Laser Class 4 (wavelength: 1064 nm)
Oscillation mode: Single mode (M² < 1.3)
Output: 8 W (during CW operation)
Output stability: ±2% (at output of 20% or higher)
Q-switch frequency: CW, 1–200 kHz
▼Guide Laser
Semiconductor laser: Laser Class 2 (wavelength: 655 nm)
Output: 1.0 mW
▼Guide Light
LED pointer (green)
▼Marking Area
155 × 155 mm
▼Working Distance
357 ± 2 mm
▼Marking Resolution
2 μm
▼Marking Types
KEYENCE original fonts: numbers/English letters/katakana/hiragana/kanji (JIS Levels 1 and 2)
User fonts: Up to 2 fonts can be registered
TrueType fonts: TrueType fonts installed on a PC
Variable text: Auto calendar/expiration date display/shift code/auto counter/rank marking
BMP/JPEG/PNG/TIFF/PCD
Processing patterns: Fixed point/straight line/dashed line/circle/ellipse
▼Marking Conditions
Marking layout: Straight line/diagonal/arc/vertical writing
Marking mode: Stationary/moving
Marking size: Character height 0.5–155 mm
Character width 0.5–155 mm
Input unit 0.001 mm
Settings: Up to 2,000 settings can be registered
Setting blocks: 256 blocks
▼Functions
Bold text setting/intersection removal setting/scan speed optimization/continuous marking function/pallet marking function/sample marking function/test marking function/thumbnail registration/CSV file saving/automatic backup function/laser power offset function/font substitution/preset function/logo editing tool/work image display function/communication history display/terminal block monitor and simulation
▼Terminal Block I/O
Inputs: Error reset/trigger inhibit/stop processing operation/emergency stop/stop marking laser/laser control/counter UP/counter DOWN/counter RESET/encoder pulse/start marking
Outputs: Laser excitation status/marking complete/marking in progress/ready/warning/error/DC 24 V
▼USB Port For connection to laser marker setup software (MARKING BUILDER) only
▼Marker Installation Orientation Any direction
▼Setup Conditions
Guide laser: Text (single pass)/text (continuous)/area frame and crosshair (continuous)/work image (continuous)
Distance pointer: LED pointer + guide laser light
▼Marker Cable Length
5 m
▼Cooling Method
Air-cooled electronic cooling
▼Rated Voltage
AC 100–120/200–240 V ±10% (50/60 Hz), max. 10 A
▼Power Consumption
Max. 700 VA (100–120 V)/max. 800 VA (200–240 V)
▼Weight
Controller: 22.0 kg (including fiber cable)
Head: 8.0 kg, 8.8 kg
※Specifications are provided for reference only and are based on information from the manufacturer's website.
Some information may be incorrect. Please let us know if you notice any errors so we can correct them. Please treat this information as a general reference only.
For details, please contact the manufacturer.
|
|
Ships from Kyoto
■Shipping Fee (prepaid only)
Due to the item's large size, shipping fees vary by region.
[Hokkaido] ¥12,000 [Hokkaido]
[Tohoku] ¥9,500 [Aomori, Iwate, Akita, Miyagi, Yamagata, Fukushima]
[Kanto] ¥7,700 [Ibaraki, Tochigi, Gunma, Saitama, Chiba, Tokyo, Kanagawa, Yamanashi]
[Shinetsu] ¥7,700 [Niigata, Nagano]
[Hokuriku] ¥6,500 [Toyama, Ishikawa, Fukui]
[Tokai] ¥6,500 [Gifu, Shizuoka, Aichi, Mie]
[Kansai] ¥6,000 [Shiga, Kyoto, Osaka, Hyogo, Nara, Wakayama]
[Chugoku] ¥6,500 [Tottori, Shimane, Okayama, Hiroshima, Yamaguchi]
[Shikoku] ¥6,500 [Tokushima, Kagawa, Ehime, Kochi]
[Kyushu] ¥8,500 [Fukuoka, Saga, Nagasaki, Oita, Kumamoto, Miyazaki, Kagoshima]
[Okinawa] ¥12,000 [Okinawa]
※Additional shipping fees apply for delivery to remote islands. Please contact us before purchasing.
※All items shipped by our company are covered by shipping insurance.
Please contact us if the item is damaged in transit.
If the damage can be repaired, we will arrange for repairs.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like a quotation or receipt.
We will do our best to accommodate your needs.
●We can issue a set of three documents: quotation, invoice, and delivery note.
Please provide the details required for issuance (billing address, mailing address, date for the stamp, etc.).
※If you need these documents, please contact us before purchasing.
|
