【With Calibration Certificate】TOPCON/Topcon Palst Total Station GPT-7005F Surveying Basic Software Included Shift-type Will be shipped after calibration. Please allow 1–2 weeks【Used】

Please let us know if you would like an estimate or receipt.
We can accommodate your needs flexibly.

■The GPT-7000 series models are almost identical!

The only differences are
the horizontal angle display unit and accuracy, and the sensitivity of the level vial.

▼Horizontal angle display unit
GPT-7001 ：1”/0.5”
GPT-7003/70003F：5”/1”
GPT-7005/7005F ：10”/5”

▼Horizontal angle accuracy
GPT-7001 ：1”
GPT-7003/70003F：3”
GPT-7005/7005F ：5”

▼Level vial sensitivity
GPT-7001 ：20”/2mm
GPT-7003/70003F
GPT-7005/7005F ：30”/2mm

●Base plate type: Shift type
●Certification: Geospatial Information Authority of Japan, Class 2A
●Angular accuracy: 5 "
●Angle measurement method: Absolute angle measurement
●Distance measurement accuracy: ±(2mm+2ppm）m.s.e

Telescope
▼Overall length: 150mm
▼Effective aperture: 45mm (EDM: 50mm)
▼Magnification: 30x
▼Image: Erect
▼Field of view: 1°30’
▼Resolving power: 2.8゛
▼Minimum focusing distance: 1.3m

Distance Measuring Unit
▼Measurement range
Reflectorless mode: Kodak Gray Card (white surface) 1.5m–250m
Prism mode: Single prism 3000m
▼Measurement accuracy
Reflectorless mode, 1.5m and above: ±(5mm) m.s.e. Prism mode
Up to 25m: ±(3mm + 2ppm×D)m.s.e.
25m and above: ±(2mm + 2ppm×D)m.s.e.
▼Laser safety class: Class 1
▼Display units: Fine measurement 1mm/0.2mm selectable
　　　　 　　　 Coarse measurement 10mm/1mm selectable
　　　　　　　　Tracking measurement 10mm
▼Measurement time: Fine measurement, 1mm, approx. 1.2 sec. (approx. 3 sec. for first measurement)
　　　　　　　　 　　　　　 　 0.2mm, approx. 3 sec. (approx. 4 sec. for first measurement)
　　　　　　　　Coarse measurement, approx. 0.5 sec. (approx. 2.5 sec. for first measurement)
　　　　　　　　Tracking measurement, approx. 0.3 sec. (approx. 2.5 sec. for first measurement)
▼Atmospheric correction: -999.9 to +999.9ppm (0.1ppm increments)
Prism constant correction: -99.9 to +99.9mm (0.1mm increments)

Angle Measurement Unit
▼Angle measurement method: Absolute angle measurement
▼Detection method: Horizontal angle: Dual-sided detection　
　　　　 　　　 Vertical angle: Dual-sided detection
▼Display unit: 10"/5"
▼Angular accuracy: 5″
▼Scale diameter: 71mm

Vertical and Horizontal Angle Compensator
▼Type: Automatic vertical and horizontal angle compensation
▼Operating range: ±4'
▼Compensation unit: 1"

Plumbing Telescope
▼Magnification: 3×
▼Focusing range: 0.5m–∞
▼Image: Erect
▼Field of view: 4(φ91mm/1.3m)

Laser Pointer
▼Light source: LD (visible)
▼Wavelength: 690nm
▼Output: 1mW or less
▼Laser class: Class 2

Internal Power Supply
▼Output voltage: DC7.4V
▼Capacity: 4,400mAh
▼Charging time: 4 hours
▼Continuous operating time: Angle measurement only: 10 hours; distance and angle measurement: 5 hours
▼Operating temperature range: -20 to +50℃
▼Dimensions: 344 (L) × 245 (W) × 219 (H) mm
▼Weight: Main unit: 6.5kg (including internal power supply)

※Specifications are provided for reference only and are based on the manufacturer's website.
Some information may be incorrect. Please contact us if you notice an error, and we will correct it. Please use these details as a general reference only.
For details, please contact the manufacturer.

Ships from Kyoto

■Shipping (prepaid shipping only)
Flat rate of ¥3,200 nationwide
The same shipping fee applies to Hokkaido, Okinawa, and remote islands.



※All items we ship are insured during transit.
Please contact us if the item is damaged in transit.
If the damage can be repaired, we will arrange a repair.
Returns are not accepted. Thank you for your understanding.

Please let us know if you would like an estimate or receipt.
We can accommodate your needs flexibly.


●We can issue a set of three documents: estimate, invoice, and delivery note.
Please provide the necessary details for issuing them (billing address, delivery address, date for the seal, etc.).
※If you need these documents, please contact us before purchasing.