|
| ■Product Name |
|
TOPCON
Pulse Total Station
GPT-7005 Hiper Detachable
■Program Software: Basic Surveying
■Calibration Date: April 2021
*It has not been used since calibration
|
| ■Accessories |
・Instruction Manual
・Program Card (Basic Surveying)
・Battery (BT-61Q)
・Charger (NC-LSC05/BC-30)
・Plumb Bob
・Tool Set (Screwdriver, Hex Key, Adjustment Pin, Cleaning Brush)
・Silicone Cloth
・Lens Cover
・Storage Case
※All accessories are shown in the photos.
Please note that items not shown in the photos are not included.
※Calibration certificate is not included
●Regarding batteries, rechargeable batteries, parts, and consumables that need replacement:
This item is sold outside the scope of initial defects and operational guarantees. Please arrange replacements yourself if necessary. Thank you for your understanding.
|
|
The GPT-7000Hiper is an all-in-one, multifunctional total station equipped with a long-range mode featuring non-prismatic ranging up to 1,200 m. It comes standard with application software that significantly enhances practical performance.
●Data collector function and application programs come standard
The data collector and application programs are built into the body of the Pulse Total Station. It is an all-in-one total station.
●Narrow-beam pinpoint pulse
Uses a narrow-beam pulse laser that eliminates range errors. It can measure through wire mesh and through tree leaves. This improves work efficiency in site surveys and traverse surveys in mountainous areas.
●Large color display & touch panel
The large color display offers excellent visibility outdoors, and the backlight allows for work at night and inside tunnels.
●Point guide
A convenient feature for prism holders to check the instrument's sighting direction during surveying and setup. Depending on the lighting and flashing status of the point guide (red LED), the prism holder can easily confirm the instrument's sighting direction.
■The GPT-7000Hiper series are almost identical products!!
The only differences are
the board type, horizontal angle display units, and accuracy.
▼Horizontal angle display units
GPT-7001Hiper: 1"/0.5"
GPT-7003Hiper/70003FHiper: 5"/1"
GPT-7005Hiper/7005FHiper: 10"/5"
▼Horizontal angle accuracy
GPT-7001Hiper: 1"
GPT-7003Hiper/70003FHiper: 3"
GPT-7005Hiper/7005FHiper: 5"
●Board type: Absolute angular measurement method
●Certification: Geospatial Information Authority of Japan Class 2A
●Angular measurement accuracy: 5"
●Angular measurement method: Absolute angular measurement
●Ranging accuracy: ±(2 mm + 2 ppm) m.s.e
|
| ■Condition |
|
※This item is sold outside the scope of operational guarantees. No claims, returns, or support.
Please understand that we cannot accept inquiries or provide explanations after purchase.
※Maintenance and repair costs are the responsibility of the customer.
※The product condition is exactly as shown in the photos. We look forward to orders from customers who understand this.
※Please refrain from ordering if you are strict about the condition.
This product has not been used since calibration,
and although some time has passed, there are no major errors.
It is sold as-is,
but we can recalibrate it and provide a calibration certificate for an additional 33,000 yen if you require certified accuracy
|
|
Telescope
Overall length: 150 mm
Effective diameter: 45 mm (EDM: 50 mm)
Magnification: 30x
Image: Erect
Field of view: 1°30'
Resolving power: 2.8"
Minimum focusing distance: 1.3 m
Ranging section
▼Ranging range
Prism mode: 1 prism 3,000 m
Non-prismatic L mode: Kodak gray card (1 m square, white side) 5–1,200 m
Ranging accuracy/Display unit/Measurement time
▼Prism mode
Fine: 1 mm/±(2 mm + 2 ppm × D) m.s.e./1 mm/1.2 sec (3 sec initially)
Course: 1 mm/±(7 mm + 2 ppm × D) m.s.e./1 mm/0.5 sec (2.5 sec initially)
Tracking: ±(10 mm + 2 ppm × D) m.s.e./10 mm/0.3 sec (2.5 sec initially)
Ranging range: 1 prism 3,000 m
▼Non-prismatic L mode
Fine: 1 mm/±(10 mm + 10 ppm × D) m.s.e./1 mm/1.5–6 sec (6–8 sec initially)
Course: 5 mm/±(20 mm + 10 ppm × D) m.s.e./5 mm/1–3 sec (6–8 sec initially)
Tracking: ±100 mm m.s.e./10 mm/0.4 sec (4–7 sec initially)
Angular measurement section
Angular measurement method: Absolute angular measurement method
Detection method Horizontal angle: Dual-side detection
Vertical angle: Dual-side detection
Display unit: 10"/5"
Angular measurement accuracy: 5″
Scale diameter: 71 mm
Display section
Display: 3.5-inch TFT color LCD display, front and back, with backlight
Maximum display range: Up to 99,999,999,999 m
Keyboard section
Keyboard: 28 keys
Applied measurement functions: Azimuth setting/Remote vertical height/Opposite side measurement/Angle measurement
Computer section
OS: Microsoft Windows CE.NET4.2
Internal memory: 64 MB/RAM 64 MB Flash disk (internal)
Interface: 6-pin RS-232C/USB/CompactFlash
Vertical and horizontal angle correction device
Type: Automatic vertical and horizontal angle correction
Operating range: ±4'
Correction unit: 1"
Reflecting telescope
Magnification: 3×
Focusing range: 0.5 m–∞
Image: Erect
Field of view: 4 (φ91 mm/1.3 m)
Other
Point guide: Yes
Laser pointer: Yes
Board type: Detachable/Centering type
Dimensions: 344 (L) × 245 (W) × 219 (H) mm
Weight: Body: 6.6 kg (including internal power supply)
※Specifications are for reference only. Listed based on the manufacturer's website.
There may be errors in the listing. Please contact us if you find any, and we will correct them. Please consider them as reference only.
For more details, please contact the manufacturer.
|
|
The shipping area is Kyoto.
■Shipping Fee (Prepaid only)
Flat rate nationwide: 3,200 yen
Shipping to Hokkaido, Okinawa, and remote islands is also the same fee.
※We insure all shipped products.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Thank you for your understanding.
|
|
