|
| ■Product Name |
|
【With Calibration Certificate】
TOPCON
Pulsar Total Station
GPT-7003 Hiper
■Program Software: Basic Surveying
■Calibration Date: November 2020
|
| ■Accessories |
・Instruction Manual
・Program Card (Basic Surveying)
・Battery (BT-61Q)
・Charger (NC-LSC05/BC-30)
・Plumb bob
・Tool Set (Screwdriver, Hex Wrench, Adjustment Pin, Cleaning Brush)
・Lens Hood
・Lens Cover
・Storage Case
※The accessories shown in the photos are all that is included.
Please note that items not shown in the photos are not included.
●Regarding batteries/rechargeable batteries and parts/consumables that need replacement:
These are not covered by the initial product defect or operation warranty. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
The GPT-7003 Hiper is an all-in-one, multifunctional total station equipped with a long-range mode featuring non-prism ranging up to 1,200 m. It comes standard with application software that significantly enhances practical performance.
●Standard data collector function and application programs
The Pulsar total station body is equipped with a data collector and application programs. It is an all-in-one total station.
●Small-diameter pinpoint pulse
Uses a small-diameter pulse laser that eliminates range errors. It can measure through wire mesh and through gaps in tree leaves. This improves work efficiency in topographic surveys and traverse surveys in mountainous areas.
●Large color display & touch panel
The large color display offers excellent visibility outdoors, and the backlight allows work at night and inside tunnels.
●Point guide
A convenient feature for prism men to check the instrument's sighting direction during surveying and setting out. Depending on the lighting and flashing status of the point guide (red LED), the prism man can easily check the instrument's sighting direction.
■The GPT-7000 Hiper series are almost identical products!!
The only differences are
the board type and the horizontal angle display unit/accuracy.
▼Horizontal angle display unit
GPT-7001 Hiper: 1"/0.5"
GPT-7003 Hiper/70003F Hiper: 5"/1"
GPT-7005 Hiper/7005F Hiper: 10"/5"
▼Horizontal angle accuracy
GPT-7001 Hiper: 1"
GPT-7003 Hiper/70003F Hiper: 3"
GPT-7005 Hiper/7005F Hiper: 5"
●Board type: Absolute angular measurement system
●Certification: Geospatial Information Authority of Japan Class 2A
●Angular measurement accuracy: 3"
●Angular measurement system: Absolute angular measurement
●Ranging accuracy: ±(2 mm + 2 ppm) m.s.e
|
| ■Condition |
|
※Operation is not covered by the warranty. Sold as-is, with no claims, returns, or support.
Please understand that we cannot accept inquiries or provide explanations after purchase.
※Maintenance and repair costs are the responsibility of the customer.
※The product condition is exactly as shown in the photos. We look forward to orders from customers who understand and accept this.
※Please refrain from ordering if you are strict about the product's condition.
The product has not been used since its calibration,
so although some time has passed, there are no major errors.
It is sold as-is,
but calibration can be provided for an additional 33,000 yen if you require higher accuracy.
|
|
Telescope
Overall length: 150 mm
Effective diameter: 45 mm (EDM: 50 mm)
Magnification: 30x
Image: Erect
Field of view: 1°30'
Resolving power: 2.8"
Minimum focusing distance: 1.3 m
Ranging section
▼Ranging range
Prism mode: 1 prism 3,000 m
Non-prism L mode: Kodak gray card (1 m square, white side) 5–1,200 m
Ranging accuracy/Display unit/Measurement time
▼Prism mode
Fine: 1 mm/±(2 mm + 2 ppm × D) m.s.e./1 mm/1.2 seconds (3 seconds for the first measurement)
Course: 1 mm/±(7 mm + 2 ppm × D) m.s.e./1 mm/0.5 seconds (2.5 seconds for the first measurement)
Tracking: ±(10 mm + 2 ppm × D) m.s.e./10 mm/0.3 seconds (2.5 seconds for the first measurement)
Ranging range:1 prism 3,000 m
▼Non-prism L mode
Fine: 1 mm/±(10 mm + 10 ppm × D) m.s.e./1 mm/1.5–6 seconds (6–8 seconds for the first measurement)
Course: 5 mm/±(20 mm + 10 ppm × D) m.s.e./5 mm/1–3 seconds (6–8 seconds for the first measurement)
Tracking: ±100 mm m.s.e./10 mm/0.4 seconds (4–7 seconds for the first measurement)
Angular measurement section
Angular measurement system: Absolute angular measurement system
Detection method Horizontal angle: Both sidesDetection
Vertical angle: Both sides
Display unit: 5"/1"
Angular measurement accuracy: 3"
Scale diameter: 71 mm
Display section
Display: 3.5-inch TFT color LCD display, front and back, with backlight
Maximum display range: Up to 99,999,999,999 m
Keyboard section
Keyboard: 28 keys
Application measurement functions: Azimuth setting/Remote vertical height/Opposite side measurement/Angle measurement
Computer section
OS: Microsoft Windows CE.NET 4.2
Internal memory: 64 MB/RAM 64 MB Flash disk (internal)
Interface: 6-pin RS-232C/USB/CompactFlash
Vertical and horizontal angle correction device
Type: Automatic vertical and horizontal angle correction
Operating range: ±4'
Correction unit: 1"
Reflecting telescope
Magnification: 3x
Focusing range: 0.5 m–∞
Image: Erect
Field of view: 4° (φ91 mm/1.3 m)
Other
Point guide: Yes
Laser pointer: Yes
Board type: Removable/Centering type
Dimensions: 343 (L) × 245 (W) × 219 (H) mm
Weight: Body: 6.6 kg (including internal power supply)
※Specifications are for reference only. They are based on the manufacturer's website.
There may be errors in the description. Please contact us if you find any, and we will correct them. Please use the information for reference only.
For more details, please contact the manufacturer.
|
|
The shipping area is Kyoto.
■Shipping fees (prepaid only)
Flat rate nationwide: 3,200 yen
Shipping to Hokkaido, Okinawa, and remote islands is also the same fee.
※We insure all shipped products.
If the product is damaged, please contact us.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like an estimate or receipt issued.
We will respond flexibly to suit your circumstances.
●We can issue a set of three documents: an estimate, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If required, please contact us before purchasing.
|
