|
Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
|
【Only One Unit Available】
Fujikura
Fiber Splicer FSM-16R
Up to 4-Core
|
| ■Accessories |
・Instruction Manual
・Power Cord DCC-08
・Charging Cable
・AC Adapter
・Battery Pack BTR-04
・Case
※All accessories are shown in the photos.
Please note that items not shown in the photos are not included.
●Regarding batteries/rechargeable batteries and parts/consumables that need replacement,
they are not covered by the initial product defect or operation warranty. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
Fiber splicing for single-core to 4-core fibers is possible.
Applicable Fiber: Single-mode (SM), Dispersion-Shifted (DS), Multimode (MM), and Non-Zero Dispersion-Shifted (NZ-DS) single-core to 4-core silica fibers
Cladding Diameter: 125μm
Fiber Coating Diameter: Single-core coating diameter 0.25mm, 0.9mm / Multimode tape thickness 0.25mm–0.4mm
|
| ■Condition |
|
The product is sold as-is.
As it is a used product, there are minor scratches from use.
This product has more scratches, stains, and yellowing than shown in the photos.
※Please refrain from purchasing if you are strict about the condition.
※The previous customer's settings were confirmed for a series of operations, so the purchaser needs to enter the settings after the product arrives.
※Professional knowledge is required for use.
We sell products, but support and explanations are not included in the price.
※Operation is not covered by the warranty. No claims, no returns, no support.
Please understand that we cannot accept inquiries or explanations after purchase.
※Maintenance and repair costs are borne by the customer.
The product condition is exactly as shown in the photos. We look forward to orders from those who understand this.
※We do not guarantee the remaining battery capacity.
Even if the remaining capacity is low, consumables are not covered by the warranty.
■The FSM-16R is an older model, so please consider the 【Newer Model】
Fujikura Fiber Splicer FSM-17R, Up to 4-Core
https://shop.recyclehunter.com/products/fsm-17r-2
|
|
▼Applicable Fiber
Single-mode (SM), Dispersion-Shifted (DS), Multimode (MM), and Non-Zero Dispersion-Shifted (NZ-DS) single-core to 4-core silica fibers
▼Cladding Diameter
125μm
▼Fiber Coating Diameter
Single-core coating diameter 0.25mm, 0.9mm / Multimode tape thickness 0.25mm–0.4mm
▼Clamping Method
Fixed by fiber holder
▼Splicing Method
Fixed V-groove fiber splicer
▼Actual Splicing Loss
SM: 0.05dB / DS: 0.08dB / GI: 0.02dB (all standard values)
▼Splicing Mode
30 modes (9 splicing conditions pre-stored at the factory)
▼Standard Splicing Time
30 seconds (when splicing 4-core tape)
▼Estimated Splicing Loss Function
Yes
▼Splicing Proof Test
Tensile strength 1.96N (approx. 200gf)
▼Splicing Data Recording
Stores the latest 250 splicing records
(Discharge conditions, estimated loss, splicing mode, misalignment, end-face angle, comments) in internal memory
▼Automatic Discharge Intensity Correction Function
Adapts to changes in atmospheric pressure (3500m)
▼Wind Resistance
Maximum allowable wind speed 15m/sec
▼Monitor
Large 5-inch color monitor
▼Heating Device for Reinforcement Sleeves
Supports both 40mm and 60mm lengths
▼Heating Mode
10 modes (3 heating conditions pre-stored at the factory)
▼Standard Heating Reinforcement Time
100 seconds (when heating reinforcing 4-core tape)
▼Power Supply
AC 100–240V 50/60Hz / Slot-in battery (NiCd: DC12V)
▼Standard Number of Splicings per Charge
35 splicings / Includes HJS-02 use and heating reinforcement (when fully charged)
▼Dimensions/Weight
W150mm×D150mm×H120mm (excluding the wind shield)
Approx. 2.7kg (including AC adapter)
※Specifications are for reference only. Listed based on the manufacturer's website.
There may be incorrect information. Please contact us if you find any, and we will correct it. Please consider it as a reference only.
For more details, please contact the manufacturer.
|
|
Shipping area is Kyoto
■Shipping Fees (Prepaid only)
Free shipping nationwide!!
Shipping to Hokkaido, Okinawa, and remote islands is also free.
※We insure all shipped products.
If there is any damage, please contact us.
If the damaged area can be repaired, we will provide repair service.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If needed, please contact us before purchasing.
|
