|
Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
|
【Only One Unit Available】
Fujikura
Fiber Splicer FSM-16R
Up to 4-Core
|
| ■Accessories |
・Instruction Manual
・Power Cord DCC-08
・Charging Cable
・AC Adapter
・Battery Pack BTR-04 (Degraded; can be replaced with a refurbished one for an additional 39,800 yen upon request)
・Case
※All accessories are shown in the photos.
Please note that items not shown in the photos are not included.
●Regarding batteries/rechargeable batteries and parts/consumables that need replacement:
These are not covered by the initial product defect or operation guarantee. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
Single-core to 4-core fiber splicing is possible.
Applicable Fiber: Single-mode (SM), Dispersion-Shifted (DS), Multimode (MM), and Non-Zero Dispersion-Shifted (NZ-DS) single-core to 4-core silica fiber
Cladding Diameter: 125μm
Fiber Coating Diameter: Single-core coating diameter 0.25mm, 0.9mm / Multimode tape thickness 0.25mm–0.4mm
|
| ■Condition |
|
The product is sold as-is.
As this is a used product, it has minor scratches from use.
This product has more scratches, stains, and yellowing than shown in the photos.
※Please refrain from purchasing if you are strict about the condition.
※The previous customer's settings were confirmed for a series of operations, so the purchaser will need to enter their own settings after the product arrives.
※Professional knowledge is required for use.
We sell the product, but support and explanations are not included in the price.
※Operation is not guaranteed. No claims, no returns, no support.
Please understand that we cannot accept inquiries or provide explanations after purchase.
※Maintenance and repair costs are the customer's responsibility.
The product condition is exactly as shown in the photos. We look forward to orders from those who understand this.
※We do not guarantee the remaining battery capacity.
Even if the remaining capacity is low, consumables are not covered by the guarantee.
■The FSM-16R is an older model, so please consider the 【Newer Model】
Fujikura Fiber Splicer FSM-17R, Up to 4-Core
https://shop.recyclehunter.com/products/fsm-17r-2
|
|
▼Applicable Fiber
Single-mode (SM), Dispersion-Shifted (DS), Multimode (MM), and Non-Zero Dispersion-Shifted (NZ-DS) single-core to 4-core silica fiber
▼Cladding Diameter
125μm
▼Fiber Coating Diameter
Single-core coating diameter 0.25mm, 0.9mm / Multimode tape thickness 0.25mm–0.4mm
▼Clamping Method
Fixed by fiber holder
▼Splicing Method
Fixed V-groove splicer
▼Actual Splicing Loss
SM: 0.05dB / DS: 0.08dB / GI: 0.02dB (all standard values)
▼Connection Modes
30 modes (9 connection conditions pre-stored at the factory)
▼Standard Splicing Time
30 seconds (when splicing 4-core tape)
▼Estimated Connection Loss Function
Yes
▼Connection Proof Test
Tensile strength: 1.96N (approx. 200gf)
▼Connection Data Recording
Stores the latest 250 connections
(discharge conditions, estimated loss values, connection mode, misalignment, end-face angle, comments) in internal memory
▼Automatic Discharge Intensity Correction Function
Adapts to changes in atmospheric pressure (3500m)
▼Wind Resistance
Maximum allowable wind speed: 15m/sec
▼Monitor
Large 5-inch color monitor
▼Heating Device for Reinforcement Sleeve
Supports both 40mm and 60mm lengths
▼Heating Modes
10 modes (3 heating conditions pre-stored at the factory)
▼Standard Heating Reinforcement Time
100 seconds (when heating 4-core tape)
▼Power Supply
AC 100–240V 50/60Hz / Slot-in battery (NiCd: DC12V)
▼Standard Number of Connections per Charge
35 connections/HJS-02, including heating reinforcement (when fully charged)
▼Dimensions/Weight
W150mm×D150mm×H120mm (excluding the wind guard)
Approx. 2.7kg (including AC adapter)
※Specifications are for reference only. Listed based on the manufacturer's website.
There may be errors in the description. Please contact us if you find any, and we will correct them. Please consider this as a reference only.
For more details, please contact the manufacturer.
|
|
Shipping from Kyoto
■Shipping Fees (Prepaid Only)
Free shipping nationwide!!
Shipping to Hokkaido, Okinawa, and remote islands is also free.
※We insure all shipped products against transit damage.
If damage occurs, please contact us.
If the damaged area can be repaired, we will provide repair services.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If required, please contact us before purchasing.
|
