|
Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
|
【Junk Item】
NIKON/Nikon JEC/JEC
Total Station FALDY-10i
|
| ■Accessories |
・Instruction Manual
・Internal Battery
※All accessories are shown in the photos.
Please note that items not shown in the photos are not included.
●Regarding batteries/rechargeable batteries and parts/consumables that need replacement:
They are not covered by the initial product defect or operation warranty. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
●Removable Base Plate
●Certification: Geospatial Information Authority of Japan Class 2A
●Angular Accuracy: 5" Angle Display: 5/10/20 seconds
●Angular Measurement Method: Incremental angular measurement
●Distance Accuracy: Prism (3mm+3ppm×D) m.s.e
1-element 2700m Mini-prism 500m |
| ■Condition |
|
As this is a used item, there are minor scratches from use.
・The LCD on one side does not display.
Sold as-is.
Therefore, it is sold without an operation warranty.
Please purchase on a no-claim, no-return basis.
。
|
|
▼Telescope
Image: Erect
Magnification: 30×
Aperture: 45mm
Field of View: 1°20’
Minimum Focusing Distance: 1.3m
Resolution: 2.5"
▼Distance Measurement
Distance Measurement Range (for 40km visibility)
1-element Prism: 2,700m
3-element Prism: 3,600m
9-element Prism: 4,400m
Distance Accuracy: Precision Measurement Mode: ±(3+2ppm×D), D is the measured distance, unit mm
High-Speed Measurement Mode: ±(5+3ppm×D), up to 500m
Measurement Time: Precision Measurement Mode: Every 3.0 seconds (4.0 seconds for the first measurement)
High-Speed Measurement Mode: Approx. every 0.8 seconds (1.8 seconds for the first measurement)
Tracking Measurement Mode: Every 0.5 seconds (1.5 seconds for the first measurement)
Distance Measurement Unit: mm or ft.
Minimum Display: Precision Measurement Mode: 0.2mm/0.001ft.
High-Speed Measurement Mode: 1mm/0.002ft.
Tracking Measurement Mode: 1cm/0.02ft.
Maximum Display: Up to 9999.9998m/29999.999ft.
▼Horizontal Angle
Horizontal Angle Unit: deg or mG or MIL
Minimum Display: 5"/1mG
Horizontal Angle Accuracy: 3"
Reading Method: Electrical reading by optical incremental encoder
Reads both horizontal and vertical angles
▼2-Axis Tilt Sensor
Method: Capacitive detection
Correction Range: Tilt of 3 in all directions from vertical
▼Centering Telescope
Image: Erect
Magnification: 3×
Field of View: 5"
Focusing Range: 0.5m to ∞
▼Fine Motion Method: Single-axis clamp coarse/fine motion
▼Spirit Level Sensitivity
Flat Spirit Level: 30"/2mm
Circular Spirit Level: 10"/2mm
▼LumiGuide Function
Operating Range: Up to 100m
Beam Spread: Within approx. 6cm at 100m (±1.5°)
▼Large Leveling Base: Removable
▼Weight
Main Unit: 6.8kg (excluding 0.7kg internal battery)
Case: 5.2kg
▼Operating Temperature Range: -20° to +50℃
※Specifications are for reference only. Listed based on the manufacturer's website.
There may be incorrect information. Please contact us if you find any, and we will correct it. Please use it for reference only.
For details, please contact the manufacturer.
|
|
Shipping is from Kyoto.
■Shipping Fee (Prepaid Only)
Flat Rate of 3,200 yen Nationwide
Shipping to Hokkaido, Okinawa, and remote islands is also the same fee.
※We insure all shipped products.
If, by any chance, there is damage, please contact us.
If the damaged part can be repaired, we will provide repair service.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If required, please contact us before purchasing.
|
