【Only 1 Unit Available】FLUKE Cable Analyzer DTX-1800 CAT 6A Class EA Channel Adapter LAN Cable Tester “Cable Installation” and “Network Management” OTDR Cat 5e Cat 6 Newer Model of the DSP-4300【Offered at a Lower Price Without DTX-CHA002】

Please let us know if you would like an estimate or receipt.
We will respond flexibly to meet your needs.

●Reduce the total annual cost associated with certification testing by up to 33% by using the DTX
●Highly reliable LAN cable tester proven in over 1 billion metal wiring certification tests to date
●Verified by ETL, one of the certification bodies, for ISO Accuracy Level IV and TIA Accuracy Level IIIe
●Analyze test results with LinkWare Report Software and create test reports in a dedicated format
●Trusted by over 20 cabling manufacturers worldwide
●Perform basic fiber certification 5 times faster using the DTX Fiber Module
●Perform a wide range of fiber certification tests
●Significantly improved usability with a color display.
●Cat.6 cable measurements completed in 12 seconds.
●Significantly expanded measurement range, supporting next-generation 10GB networks.
●Connect to a PC via USB cable for rapid test report creation.
●Supports built-in single-mode and multimode fiber modules. Testable in 12 seconds.
●Supports all tests specified in new standards, including Near-End Crosstalk (NEXT), Equal-Level Far-End Crosstalk (ELFEXT), Power Sum NEXT, Power Sum ELFEXT, attenuation, attenuation-to-crosstalk ratio (ACR), propagation delay, return loss (RL), and delay skew.

▼Test Standards
・TIA Category 3, 5e, 6, and 6A/ANSI/TIA-568-C.2
・TIA Category 5 (1000BASE-T)/TIA TSB-95
・TIA Category 6/TIA/EIA-568B.2-1
・TIA TSB-155 (DTX-1800 only)
・ISO TR 24750 (DTX-1800 only)
・ISO/IEC 11801 Class C, D, E, Ea, and F (Ea, F, and Fa DTX-1800 only)
・EN 50173 Class C, D, E, EA, and F (Ea, F, and Fa DTX-1800 only)
・ANSI TP-PMD
・IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
・IEEE 802.3an 10GBASE-T
▼Supported Cable Types
Shielded and unshielded twisted pair
(STP, FTP, SSTP, UTP) LAN cables
・TIA Category 4, 5, 5E, 6, and 6A: 100Ω
・ISO/IEC Class C and D: 100Ω and 120Ω
・ISO/IEC Class E, F, and FA: 100Ω Cat6A/Class EA permanent link adapters, TIA Cat3, 4, 5, 5e, 6, 6A, and ISO/IEC Class C, D, E, and EA permanent links
・Cat6A/Class EA channel adapters, TIA Cat3, 4, 5, 5e, 6, 6A, and ISO/IEC Class C, D, E, and EA channels
▼Autotest Speed
9 seconds for full-duplex Autotest of Category 6 twisted-pair links; 22 seconds for full-duplex Autotest of Category 6A and ISO/IEC Class F links
▼Supported Test Parameters
(Test parameters and frequency range are determined by the selected test standard)
Wire map
Length
Propagation delay
Delay skew
DC loop resistance
Insertion loss (attenuation)
Return loss (RL), RL @ Remote
NEXT, NEXT @ Remote
Attenuation-to-crosstalk ratio (ACR-N), ACR-N @ Remote
ACR-F (Equal-Level Far-End Crosstalk attenuation), ACR-F @ Remote
Power Sum ACR-F (ELFEXT), PS ACR-F @ Remote
Power Sum NEXT, PS NEXT @ Remote
Power Sum ACR-N, PS ACR-N @ Remote
Power Sum Alien NEXT (PS ANEXT)
Power Sum Alien ACR-F (PS AACR-F)
▼Display
3.7-inch (9.4cm) diagonal, 240 dots wide × 320 dots high, passive color, LCD (backlit)
▼Operating Temperature
0°C to 40°C
▼Storage Temperature
-20°C to 60°C (-4°F to 104°F)
▼Operating Relative Humidity (%RH, non-condensing)
32°F to 95°F (0°C to 35°C): 0% to 90%; 95°F to 113°F (35°C to 45°C): 0% to 70%
▼Basic Accuracy
Complies with the Level IV requirements of IEC 61935-1/Ed. 3.
▼Carrying Case Size:
Approx. (W)45cm × (H)33cm × (D)16cm

※Specifications are for reference only. Listed based on the manufacturer's website.
There may be errors in the description. Please contact us for corrections. Please use it for reference only.
For more details, please contact the manufacturer.

Shipping from Kyoto

■Shipping Fee (Prepaid Only)
Flat Rate: ¥3,200 Nationwide
Shipping to Hokkaido, Okinawa, and remote islands is also at the same rate.



※We provide shipping insurance for all products we ship.
Please contact us if there is any damage.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Thank you for your understanding.

●Except for some items, all products we handle are resale items.
Some products may show signs of aging such as scratches and stains. Please judge by the photos.
There may be scratches and stains that cannot be fully captured in the photos. Also, judgment of product condition varies from person to person. Thank you for your understanding.
Furthermore, as images and descriptions cannot fully convey the detailed condition, please do not purchase if you are overly concerned about condition, require a perfect item with absolutely no scratches, stains, or fingerprints, or are overly sensitive.
Due to the nature of used items, they have already been used, and various internal components are worn. It is impossible to predict which component will need replacement and when, or when it will break and require replacement. The condition may deteriorate due to various causes, including changes during transport or the customer's storage methods.
Therefore, we will only provide support for products listed on the product page with an initial defect warranty, and only within that warranty period. There is no warranty for products not listed on the product page.
In the sale of used items, our service is limited to the provision of the item itself. As items are sold as-is, there are generally no product descriptions or after-sales services. Please research the usage, maintenance, and other necessary knowledge and information yourself. Please consider purchasing a used item with this understanding.