|
Please let us know if you would like an estimate or receipt.
We will accommodate your needs as flexibly as possible.
| ■Product Name |
Panasonic
SUNX Compact Beam Sensor
CX-411
Emitter: CX-411E
Receiver: CX-411D
Set |
| ■Included Items |
・Instruction manual
・Catalog
※The items shown in the photos are all that is included.
Please note that items not shown in the photos are not included.
●Batteries, rechargeable batteries, parts, and consumables that need replacement
are not covered by the initial defect or operation warranty. Please arrange for them yourself if needed. Thank you for your understanding.
|
|
Sensors that are kind to the Earth and people.
The globally standardized “CX-400 Series”
offers a wide range of models with enhanced environmental performance, detection performance, and reliability, featuring a newly developed custom IC.
The “CX-400 Series” has evolved further with this upgrade.
●Stable detection performance even in harsh environments
●Further reduced environmental impact: up to 60% lower power consumption
●Greater noise resistance with enhanced inverter countermeasures
●Improved resistance to output shorts and enhanced protection against reverse wiring
●High detection capability for a wide range of applications
●Thoroughly eliminates waste to significantly reduce environmental impact
●Through-beam models are also highly resistant to mutual interference
|
| ■Condition |
■Operation tested!!
To ensure that we deliver a quality product, we performed the following cleaning prior to sale.
Cleaning performed
・Exterior cleaning
・Interior cleaning
However, this is a used item and may have small scratches from use.
※The item will be delivered in the condition shown in the photos. Please purchase only if you are satisfied with its condition.
|
|
Sensing distance: 10 m
Sensing object: Opaque objects of φ12 mm or larger
(Note): With a slit (sold separately) attached, objects as small as φ0.5 mm can be detected (when using a round slit).
Hysteresis: -
Repeatability (perpendicular to sensing axis): 0.5 mm or less
Supply voltage: 12–24 V DC ±10%, ripple P-P 10% or less
Current consumption: Emitter: 15 mA or less
Receiver: 10 mA or less
Output: NPN transistor open collector
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output operation: Light-ON/Dark-ON, selectable by switch
Output short-circuit protection: Provided
Response time: 1 ms or less
Operation indicator: Orange LED (lights when output is ON), provided on receiver
Stability indicator: Green LED (lights when light received or not received is stable), provided on receiver
Power indicator: Green LED (lights when powered), provided on emitter
Sensitivity adjustment: Continuously adjustable, provided on receiver
Interference prevention: Up to 2 units can be mounted close together using an interference prevention filter (sold separately) (sensing distance: 5 m)
Environmental resistance / Protection rating: IP67 (IEC), submersible type (JIS)
Environmental resistance / Operating ambient temperature: -25 to +55°C (no condensation or freezing); storage: -30 to +70°C
Environmental resistance / Operating ambient humidity: 35–85% RH; storage: 35–85% RH
Environmental resistance / Operating ambient illuminance: Incandescent lamp: 3,000 lx or less at the receiver surface
Environmental resistance / Dielectric strength: 1,000 V AC for 1 minute, between all live parts and case
Environmental resistance / Insulation resistance: 20 MΩ or more at 250 V DC megger, between all live parts and case
Environmental resistance / Vibration resistance: 10–500 Hz, double amplitude 1.5 mm (max. 10 G), 2 hours in each of the X, Y, and Z directions
Environmental resistance / Shock resistance: 500 m/s2 (approx. 50 G), 3 times in each of the X, Y, and Z directions
Light source (modulated): Red LED
Light source (modulated) / Peak emission wavelength: 680 nm
Material: Case: PBT (polybutylene terephthalate)
Lens: Acrylic
Indicator cover: Acrylic
Cable: 0.2 mm2, 3-core (2-core for emitter), supplied with 2 m cabtyre cable
Cable extension: Can be extended up to a total length of 100 m (each for emitter and receiver) using cable of 0.3 mm2 or larger
Approx. weight: 95 g
※Specifications are provided for reference only and are based on the manufacturer's website.
Some information may be incorrect. Please contact us if you notice any errors, and we will correct them. Please use this information as a reference only.
For details, please contact the manufacturer.
|
Ships from Kyoto
■Shipping fee (prepaid shipping only)
¥1,200 nationwide
The shipping fee is the same for Hokkaido, Okinawa, and remote islands.
※All items we ship are insured during transit.
Please contact us if the item is damaged.
If the damage can be repaired, we will arrange for a repair.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like an estimate or receipt.
We will accommodate your needs as flexibly as possible.
●We can issue a set of three documents: a quotation, invoice, and delivery note.
Please provide the details required for issuance (billing address, delivery address, date of stamping, etc.).
※If you need these documents, please contact us before purchasing.
|
