|
| ■Product Name |
|
【Calibrated】
TOPCON/Topcon
Total Station CS-102F
With Pinhole Prism
|
| ■Accessories |
・Instruction Manual
・Calibration Certificate
・Internal Battery
・Charger
・Storage Case
・Free Pinhole Prism Set
・A calibration certificate is not included, but it can be issued for 30,000 yen plus tax upon request.
※The accessories shown in the photos are all that is included.
Please note that items not shown in the photos are not included.
※The pinhole prism shown in the photo is a free gift.
The items provided may vary depending on stock availability.
The color or manufacturer of the free gift may differ from those shown in the photos,
so please understand that this is a free gift.
●Regarding batteries/rechargeable batteries and parts/consumables that need replacement,
they are not covered by the initial product defect or operation warranty. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
A waterproof and dustproof total station compliant with IS Water Resistance (Protection Rating 6). It firmly protects the important internal components of the unit from dust and dirt at work sites, as well as sudden heavy rain during operation.
Distance Measurement Capability 1: High Precision and Wide Range
Achieves a class-leading distance measurement accuracy of ±(3mm + 2ppm)m.s.e. The measurement range is also generous at 700m per prism.
・System Link
Equipped with a "Serial Signal Interface (RS-232C)" that can connect directly to the FC5 data collector. It supports the full systematization of surveying by enabling data collection and surveying using the FC5.
・Comprehensive Application Measurement Function 1: Opposite Side Measurement (MLM)
Prisms can be placed at two points that cannot be directly sighted, allowing continuous measurement of the horizontal distance, slope distance, and height difference between the two points without moving the instrument.
・Comprehensive Application Measurement Function 2: Real-Time REM Measurement (Remote Elevation Measurement)
It can measure the vertical distance (height) of high-voltage power lines, bridges, and other locations that are far from the ground and where prisms cannot be installed.
・Comprehensive Application Measurement Function 3: Sighting Offset Measurement
When observing the center of trees, utility poles, or walls where a prism cannot be directly installed, measurements can be taken by offsetting the line of sight.
CS-100 series products are almost identical.
The distance measurement range/accuracy, side angle, bubble tube sensitivity, etc. differ
▼Distance Measurement Range(1 prism, normal weather conditions)
CS-101/CS-101F: 1100m
CS-102/CS-102F: 700m
▼Distance Measurement Accuracy
CS-101/CS-101F: ±(3mm + 2ppm)m.s.e.
CS-102/CS-102F: ±(3mm + 5ppm)m.s.e.
(-10℃ to +50℃)
±(5mm + 5ppm)m.s.e.
(-20℃ to -10℃)
▼Side Angle Display Unit
CS-101/CS-101F: 10”/5”
CS-102/CS-102F: 20”/10”
▼Side Angle Accuracy
CS-101/CS-101F: 5”
CS-102/CS-102F: 6”
▼Bubble Tube Sensitivity
CS-101/CS-101F: 30”/2”
CS-102/CS-102F: 40”/2”
●Base Type: Shift Type
●Certification: Geospatial Information Authority of Japan Class 3
●Angular Measurement Accuracy: 6”
●Angular Measurement Method: Incremental Angular Measurement
●Distance Measurement Accuracy: ±(3mm+5ppm)m.s.e
|
|
▼Telescope
Overall Length: 53mm
Effective Diameter: 40mm
Magnification: 26×
Image: Erect
Field of View: 1°30’
Resolving Power: 3”
Minimum Focusing Distance: 0.9m
▼Distance Measurement Unit
Distance Measurement Range: ±(3mm + 5ppm)m.s.e.
Measurement Time per Display Unit:
Fine Measurement: 1mm Approx. 2.5 seconds (Initial Approx. 4.5 seconds)
Course Measurement: 10mm/1mm Approx. 0.5 seconds (Initial Approx. 3 seconds)
Tracking Measurement: 10mm Approx. 0.3 seconds (Initial Approx. 2.5 seconds)
Atmospheric Correction: -99 to +99ppm (1ppm steps)
Prism Constant Correction: -99 to +99mm (1mm steps)
▼Angular Measurement Unit
Angular Measurement Method: Incremental Angular Measurement Method
Detection Method: Horizontal Angle Single-Side Detection, Vertical Angle: Single-Side Detection
Display Unit: 20"/10"
Angular Measurement Accuracy: 6″
Scale Diameter: 71mm
▼Vertical and Horizontal Angle Correction Device
Type: Automatic Vertical and Horizontal Angle Correction
Method: Capacitive Detection
Operating Range: ±3'
Correction Unit: 1"
▼Internal Battery
Output Voltage: DC7.2V
Capacity: 1.4AH
Charging Time: 1.5 hours
Continuous Operating Time: Angular Measurement Only 12 hours, Distance and Angular Measurement 3.5 hours
Operating Temperature Range: -20 to +50℃
Dimensions: 343 (L) × 184 (W) × 153 (H) mm
Weight: Main Unit 4.9kg (Including Internal Battery), Case 3.7kg
※Specifications are for reference only. They are listed based on the manufacturer's website.
There may be incorrect information. Please contact us if you find any, and we will correct it. Please consider them as a reference only.
For details, please contact the manufacturer.
|
|
The shipping area is Kyoto.
■Shipping Fees (Prepaid Only)
Free Shipping Nationwide!!
Shipping to Hokkaido, Okinawa, and remote islands is also free.
※We insure all shipped products.
If there is any damage, please contact us.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you wish to receive an estimate or receipt.
We will respond flexibly to suit your circumstances.
●We can issue a set of three documents: an estimate, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, date of seal, etc.).
※If needed, please contact us before purchase.
|
