|
Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
|
【Calibration Certificate Included】
TOPCON
Total Station CS-101F
■Shift-type
■Calibration Date: April 2021
※It has not been used since calibration.
|
| ■Accessories |
・Instruction Manual
・Calibration Certificate
・Battery
・Battery Charger
・Plumb Bob
・Prism
・Pin Hole
・Storage Case
※The accessories shown in the photos are all that is included.
Please note that items not shown in the photos are not included.
●Regarding batteries, rechargeable batteries, parts, and consumables that need replacement:
They are not covered by the initial product defect or operation guarantee. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
A waterproof and dustproof total station compliant with IS Water Resistance (Protection Rating 6). It firmly protects the valuable internal components from dust and dirt at work sites, as well as sudden heavy rain during operation.
Built-in high-precision 2-axis automatic compensation mechanism. Standard deviation for angular measurement: 5″
Automatic Compensation Mechanism
In addition to conventional automatic vertical compensation, it features a built-in 2-axis automatic compensation mechanism that simultaneously compensates for horizontal angles. This mechanism automatically corrects horizontal errors caused by insufficient machine leveling or large tilt angles during angle measurements, enabling high-precision angular measurements in any environment.
Distance Measurement Capability 1: High Precision and Wide Range
Achieves class-leading distance measurement accuracy of ±(3mm + 2ppm)m.s.e. The measurement range is also generous: 550m with a pinhole prism and 1,100m with one prism.
・System Link
Equipped with a "Serial Signal Interface (RS-232C)" that can connect directly to the FC5 data collector. It supports the collection of observation data and surveying using coordinate data from a computer via the FC5, fully supporting the systematization of surveying.
・Advanced Measurement Function 1: Opposite Side Measurement (MLM)
Prisms can be placed at two points that cannot be directly sighted, allowing continuous measurement of the horizontal distance, slope distance, and height difference between the two points without moving the machine.
・Advanced Measurement Function 2: Real-Time REM Measurement (Remote Elevation Measurement)
It can measure the vertical distance (height) of high-voltage power lines, bridges, and other locations far from the ground where prisms cannot be installed.
・Advanced Measurement Function 3: Sighting Offset Measurement
When observing the center of trees, utility poles, or walls where a prism cannot be directly installed, measurements can be taken by offsetting the line of sight.
・Stakeout 1: Standard Stakeout
By entering the coordinates of the installation point during stakeout work, it indicates the coordinate position with the horizontal angle and horizontal distance from a known point.
・Stakeout 2: Stakeout When the Traverse Point Cannot Be Sighted
A new point that can sight the stakeout point can be installed on the spot.
・Stakeout 3: Can Input 600 Installation Point Coordinates
The machine's internal memory can store 600 installation point coordinate data, allowing stakeout work to be carried out very efficiently by entering the data in advance.
▼Distance Measurement Range
CS-101, CS-101F: 1,100m with one prism
CS-102, CS-102F: 700m with one prism
▼Distance Measurement Accuracy
CS-101, CS-101F: ±(3mm + 2ppm)m.s.e.
CS-102, CS-102F: ±(3mm + 5ppm)m.s.e.
▼Horizontal Angle Display Unit
CS-101, CS-101F: 10″ (5″)
CS-102, CS-102F: 20″ (10″)
▼Horizontal Angle Accuracy
CS-101, CS-101F: 5″
CS-102, CS-102F: 6″
●Base Type: Shift-type
●Certification: Geospatial Information Authority of Japan Class 3 Certification
●Angular Measurement Accuracy: 5″
●Angular Measurement Method: Incremental angular measurement
●Distance Measurement Accuracy: ±(3mm + 2ppm)m.s.e.
|
| ■Condition |
■Operation has been confirmed!!
To ensure that our customers receive a product in good condition, we have performed the following cleaning before sale.
Cleaning Areas
・Exterior Cleaning
・Interior Cleaning
However, as this is a used product, there are minor scratches from use.
※The product will be delivered in the condition shown in the photos, so please purchase only if you are satisfied with its condition.
|
|
▼Telescope
Overall Length: 153mm
Effective Diameter: 40mm
Magnification: 26×
Image: Erect
Field of View: 1°30’
Resolving Power: 3″
Minimum Focusing Distance: 0.9m
▼Distance Measurement Unit
Distance Measurement Range: ±(3mm + 2ppm)m.s.e.
Display Unit Measurement Time:
Fine Measurement: 1mm Approx. 2.5 seconds (Initial Approx. 4.5 seconds)
Course Measurement: 10mm/1mm Approx. 0.5 seconds (Initial Approx. 3 seconds)
Tracking Measurement: 10mm Approx. 0.3 seconds (Initial Approx. 2.5 seconds)
Atmospheric Correction: -99 to +99ppm (1ppm steps)
Prism Constant Correction: -99 to +99mm (1mm steps)
▼Angular Measurement Unit
Angular Measurement Method: Incremental angular measurement method
Detection Method: Horizontal Angle: Dual-side detection, Vertical Angle: Single-side detection
Display Unit: 10"/5"
Angular Measurement Accuracy: 5″
Scale Diameter: 71mm
▼Vertical and Horizontal Angle Compensation Device
Type: Automatic vertical and horizontal angle compensation
Method: Capacitive detection
Operating Range: ±3'
Compensation Unit: 1"
Operating Temperature Range: -20 to +50℃
Dimensions: 343 (L) × 184 (W) × 153 (H) mm
Weight: Main Unit 4.9kg (including internal power supply), Case 3.7kg
※Specifications are for reference only. They are listed based on the manufacturer's website.
There may be errors in the description. Please contact us if you find any, and we will correct them. Please use the information for reference only.
For more details, please contact the manufacturer.
|
The shipping area is Kyoto.
■Shipping Fees (Prepaid Only)
Flat Rate Nationwide: 3,200 yen
Shipping to Hokkaido, Okinawa, and remote islands is also the same fee.
※We provide shipping insurance for all products we ship.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal date, etc.).
※If required, please contact us before purchasing.
|
