FLUKE / Fluke LinkRunner AT2000 LRAT-2000 AI3 Fluke Networks Network Auto Tester

Please let us know if you would like us to issue a quote or receipt.
We will respond flexibly to suit your circumstances.

●Instant Operation
It takes less than 3 seconds to run the first test.

●Fast Response
User-defined autotests run a series of necessary connectivity tests in a few seconds, quickly and accurately identifying and resolving network problems.

●Nearest Switch Information and VLAN Information
In addition to the IEEE Link Layer Discovery Protocol (LLDP), Cisco and Extreme discovery protocols (CDP and EDP) display VLAN information and the model, slot, and port of the nearest switch.

●TruePowerPoE Test
It quickly verifies PoE performance by actually receiving 25.5 W, the maximum power of the 802.3at standard.

●802.1x Authentication
It verifies access using 802.1x and MAC Access Control Lists (ACLs) to protect network security.

●Cable Verification and Tone Generation
The built-in wire map port allows you to check pin-to-pin connections at both ends of patch cords, as well as the length of installed wiring, shorts, opens, and split pairs.

●IPv4/IPv6 Support
Supports IPv4 and IPv6.

●Graphical Color Wire Map and Cable Details
The cable ID and built-in wire map port can detect cable opens, shorts, miswiring, and split pairs.

●Switch Information
LinkRunner AT displays the following important information about the nearest switch.
　 ・Switch Name and Model
　 ・IP Address
　 ・Port, Slot, VLAN
　 ・Duplex and Speed (Negotiated and Actual Values), etc.

■Environment
Operating Temperature and Relative Humidity: 32°F to 113°F (0°C to +45°C)
　　　　　　　　　　　　　 ※If the internal temperature of the tester exceeds 45°C
　　　　　　　　　　　 　 　　(113°F), the battery will not
　　　　　　　　　　　 　 　　be charged.
Operating Relative Humidity (RH, non-condensing): 90% (50°F to 95°F,
　　　　　　　　　　　　　　　　　　　　　10°C to 35°C)
　　　　　　　　　　　　　　　　　　　　　75% (95°F to 113°F,
　　　　　　　　　　　　　　　　　　　　　 35°C to 45°C)
Storage Temperature: -20°C to +60°C
Shock and Vibration: Random, 2g, 5Hz to 500Hz (Class 2), 1m drop test
Safety: EN61010-12nd edition
Safety (LR-AT2000 only): EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude: 4,000m; Storage: 12,000m
EMC: FCC Part 15 Class A, EN 61326-1
Certification and Compliance: Compliant with relevant European Union directives,
　　　　　　　　　　　　　 　 Australian relevant (representative)
　　　　　　　　　　　　　 　 standards, Canadian (representative)
　　　　　　　　　　　　　 　 Union list

■General
Media Access, Copper: RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T, PoE (IEEE 802.3af and 802.3at), 100BASE FX and 1000
Media Access, Fiber: SFP adapter port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 only)
Cable Test: Pair length, open circuit, short circuit, split, cross, straight, cable ID
Tone Generator: IntelliTone digital tone: [500 KHz], analog tone: [400 Hz, 1 KHz]
Dimensions: 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight: 18 ounces (0.5 kg)
Battery: Replaceable, rechargeable lithium-ion battery pack (18.5 W/hr) (included in the introductory special plan)
Battery Life: Typical operating life is 6 hours, typical charging time is 3 hours
External AC Adapter / Charger: AC input 90–264 Vac 48–62 Hz input power DC output 15 Vdc (1.2 A)
Display: 2.8-inch color LCD (320 x 240 pixels)
Keypad: 12-key synthetic rubber
LED: 2 LEDs (Link and Receive/Transmit indicators)
Host Interface: USB, 5-pin, Mini B


※Specifications are for reference only. They are listed based on the manufacturer's website.
There may be errors in the listing. Please contact us if you find any, and we will correct them. Please use them for reference only.
For more details, please contact the manufacturer.

The shipping area is Kyoto.

■Shipping Fee (Prepaid Only)
Flat Rate of 3,200 yen Nationwide
The same shipping fee applies to Hokkaido, Okinawa, and remote islands.


※We insure all shipped products.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will provide repair services.
Please note that returns are not accepted.

●Please let us know if you would like us to issue a quote or receipt.
We will respond flexibly to suit your circumstances.

●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal date, etc.).
※If needed, please contact us before purchasing.