|
Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
| ■Product Name |
Ando Electric Optical Multimeter
Power Meter AQ2150A
850/1310/1550μm Measurement
(2)
|
| ■Accessories |
・Instruction Manual
・Catalog
・Cover
・Plank Panel (Large)
・Plank Panel (Small)
・DC Pack
・AC Adapter
・Power Cord
・Storage Case
・Earphone Jack
・Dry Cell Pack
・LED UNIT AQ4250(131/155)
・LED UNIT AQ4250(085)
・SENSOR UNIT AQ2752
・Connector Adapter AQ9431(FC)
・Connector Adapter AQ9431(SC)
・Connector Adapter AQ9433(FC)
・Connector Adapter AQ9433(SC)
※All items shown in the photos are included.
Please note that items not shown in the photos are not included.
●Regarding batteries/batteries and parts/consumables that need replacement:
These are not covered by the initial product defect or operation guarantee. Please arrange for replacements yourself if necessary. Thank you for your understanding.
|
|
The AQ2150A optical multimeter is a handheld basic optical measuring instrument that can be used as an optical power meter, stabilized light source, and return loss tester by replacing the units.
It supports various measurement applications, including sensors, light sources, return loss testing, and more.
It is compact, lightweight, and battery-powered, making it highly effective in the field.
It can also be used in research, development, and manufacturing departments related to optical technologies. |
| ■Condition |
■Operation has been confirmed!!
To ensure that you receive a product in good condition, we have performed the following cleaning before sale.
Cleaning areas
・Exterior cleaning
・Interior cleaning
However, as this is a used product, there are minor scratches from use.
※The product will be delivered in the condition shown in the photos, so please purchase only if you are satisfied with its condition.
|
|
■Measurement display: 4-digit 7-segment
■Unit display: [Absolute value] dBm, mW, μW, nW, pW [Relative value] dB
■Calibration factor: Corrects the wavelength sensitivity of the sensor (5 nm steps)
■Range switching: Automatic or fixed (up/down)
■Measurement mode: CW light, CHOP light (270 Hz/1 kHz/2 kHz)
■Optical output waveform: CW light, CHOP light (270 Hz/1 kHz/2 kHz) selectable
■Measurement interval: Approx. 330 ms
■Averaging: Successive addition averaging (10/50/100 times), ON/OFF switchable
■Display resolution: Switchable between 0.1/0.01 dB
■Zero adjustment: Automatically adjusts the zero point
■Relative measurement: ・Relative measurement based on the displayed measurement value ・Relative measurement against the set reference value
■Backlight: Lights up while the backlight key is pressed, or for approximately 5 seconds after releasing the key
■Auto power off: Automatically turns off after 3 minutes or 10 minutes of inactivity (power-off function can also be turned off)
■Battery check: Low battery indicator
■Buzzer function: Operates when the input level exceeds the set level (adjustable)
■Resume function: Restores the set conditions when the power is turned off
■Backup function: Backs up the set conditions when the battery is replaced (approx. 8 hours)
■Analog output: 0 to approx. +2 V (for each range)
■Power supply: Dry cells (4 AA alkaline batteries), AC adapter (AC 100–240 V, 48–63 Hz), AP2104 Ni-Cd battery pack (optional)
■Environmental conditions: [Operating temperature] 0 to +50°C, [Storage temperature] -25 to +70°C, [Humidity] 85% or less
■Dimensions/Weight: Approx. 205 (H) × 88 (W) × 43 (D) mm, approx. 450 g
※Specifications are for reference only. They are listed based on the manufacturer's website.
There may be errors in the description. Please contact us if you find any, and we will correct them. Please use this information for reference only.
For more details, please contact the manufacturer.
|
The shipping area is Kyoto.
■Shipping fees (prepaid only)
Flat rate of 2,400 yen nationwide
Shipping to Hokkaido, Okinawa, and remote islands is also at the same rate.
※We insure all shipped products against transit damage.
In the unlikely event of damage, please contact us.
If the damaged area can be repaired, we will arrange for repair.
Returns are not accepted. Thank you for your understanding.
|
●Please let us know if you would like us to issue a quote or receipt.
We will accommodate your needs flexibly.
●We can issue a set of three documents: a quote, invoice, and delivery note.
Please provide the detailed information required for issuance (billing address, shipping address, seal/date, etc.).
※If required, please contact us before purchasing.
|